Difference between revisions of "Hardware"

From E12-11-009
Jump to navigationJump to search
Line 22: Line 22:
 
</gallery>
 
</gallery>
  
 +
[[File:side-isometric-18Sep2014-big.gif|upright=2.0|thumb|alt=C-GEn "Plan B" Polarimeter]]
 
=== Possible scintillator hardware ===
 
=== Possible scintillator hardware ===
−
* BLAST bars: [[File:Hasell_NIMA603_2009_247_BLAST.pdf]]
+
==== The "Plan B" design requires: ====
−
** PSI LADS bars: [[File:Alteholz_NIMA373_1996_374.pdf]] (these formed two of the BLAST detector planes)
+
* Total:  136x  10 cm  x 10 cm    "thick" bars
 +
108  10 cm  x 10 cm x 160 cm  E counters (top + bottom)
 +
  28  10 cm  x 10 cm x 160 cm  analyzer bars
 +
* Total:  80x    1 cm  x 10 cm    "thin" bars
 +
  52    1 cm  x 10 cm x 160 cm  dE  (top + bottom)
 +
  28    1 cm  x 10 cm x 160 cm  analyzer vetos
 +
 
 +
* All bars are double-ended readout.
 +
----
 +
 
 +
==== Existing Scintillator Bars ====
 +
===== BLAST bars (some from PSI LADS detector) =====
 +
  Ohio walls: 16x      10 cm x 22.5 cm    x 400 cm
 +
  LADS15:    28x      15 cm x 14.5 cm(*) x 160 cm
 +
  LADS20:·    28x      20 cm x  9.8 cm(*) x 160 cm
 +
  (*) bars are trapezoidal shaped; this is mid-point thickness
 +
* Availability:  '''Yes'''  (needs to be shipped to Kent St/JLab)
 +
* Location:      BATES
 +
* Contact:        Michael Kohl
 +
* References:      [[Media:Hasell_NIMA603_2009_247_BLAST.pdf |NIM A 603 (2009) 247–262]] (BLAST detector), [[Media:Alteholz_NIMA373_1996_374.pdf |NIM A 373 ( 1996) 374-38]] (PSI LADS reference)
 +
* Notes:
 +
** Bars would need to be cut and polished
 +
** The LADS bars are trapezoidal; they can be stacked into planes by alternating the 'wedge' direction
 +
** Needs new PMTs
 +
 
 +
 
 +
===== "BigBite" HAND =====
 +
  32x  10 cm x 10  cm  x  100 cm
 +
  32x  10 cm x 12.5cm  x  100 cm
 +
  12x  10 cm x 15  cm  x  100 cm
 +
  12x  15 cm x 25  cm  x  100 cm
 +
  32x    2 cm x 11  cm  x  100 cm
 +
* Availability:    '''Yes'''
 +
* Location:      JLab ESB
 +
* Contact:        Doug Higinbotham
 +
* Reference:   [http://hallaweb.jlab.org/staff/doug/outreach/students/Summer2009/Dominik-Wermus-Paper.pdf Wermus Tech Note]
 +
* Notes:
 +
** These are available now
 +
** Will likely need to replace most of the (3") PMTs
 +
 
 +
 
 +
===== GEn E02-013 BigHAND neutron array =====
 +
UVa:      100x    10 cm x 10 cm x 160 cm
 +
Glasgow:  24x    10 cm x 20 cm x 180 cm
 +
CMU:      120x      5 cm x 15 cm x 180 cm
 +
* Availability:    '''???''' (there are plans to use the BigHAND array in Hall A)
 +
* Location:  Bldg 64 (tent at NE corner of Accel area)
 +
* Contacts:  Mixed:  UVa (Donal Day), CMU (G. Franklin?), Glasgow (J. Annand); Bogdan, Albert (JLab)
 +
* Reference: [http://hallaweb.jlab.org/experiment/E02-013/ND_Geometry.pdf BigHAND Geometry]], [http://hallaweb.jlab.org/experiment/E02-013/docs.html General Documentation]]
 +
* Notes:
 +
** These are still stored in the BigHAND cartridges in Bldg 64
 +
** PMT status TBD
 +
** At our 2013 collaboration meeting Donal mentioned the UVa bars are still available and are still under UVa ownership.
 +
 
 +
 
 +
===== Existing Material at Kent State =====
 +
8x  10 cm x 51 cm x 100 cm  (actual dimensions: 4" x 20" x 40")
 +
3x  10 cm x 25 cm x 100 cm  (actual dimensions: 4" x 10" x 40")
 +
* Availability:    '''Yes'''
 +
* Location:  Kent State
 +
* Contacts:  Bryon Anderson
 +
* Reference:
 +
* Notes:
 +
** Needs cutting and polishing
 +
** PMTs needed
 +
 
 +
 
 +
===== Existing bars within Collaboration =====
 +
SUNO    (Mostafa Elaasar):  ??x  1 cm x 10 cm x 100 cm
 +
La Tech (Steve Wells):      ??x  10 cm x 10 cm x 100 cm
 +
* Availability:    '''Yes'''
 +
* Notes:
 +
** Purchased as test bars with an eye to incorporation into full polarimeter
 +
** PMTs are included

Revision as of 17:35, 29 September 2014

Magnet Documentation

Polarimeter Documentation

C-GEN Polarimeter Design / Documentation

C-GEn "Plan B" Polarimeter

Possible scintillator hardware

The "Plan B" design requires:

  • Total: 136x 10 cm x 10 cm "thick" bars
108   10 cm  x 10 cm x 160 cm   E counters (top + bottom)
 28   10 cm  x 10 cm x 160 cm   analyzer bars
  • Total: 80x 1 cm x 10 cm "thin" bars
 52    1 cm  x 10 cm x 160 cm   dE  (top + bottom)
 28    1 cm  x 10 cm x 160 cm   analyzer vetos
  • All bars are double-ended readout.

Existing Scintillator Bars

BLAST bars (some from PSI LADS detector)
 Ohio walls: 16x      10 cm x 22.5 cm    x 400 cm
 LADS15:     28x      15 cm x 14.5 cm(*) x 160 cm
 LADS20:·    28x      20 cm x  9.8 cm(*) x 160 cm
 (*) bars are trapezoidal shaped; this is mid-point thickness
  • Availability: Yes (needs to be shipped to Kent St/JLab)
  • Location: BATES
  • Contact: Michael Kohl
  • References: NIM A 603 (2009) 247–262 (BLAST detector), NIM A 373 ( 1996) 374-38 (PSI LADS reference)
  • Notes:
    • Bars would need to be cut and polished
    • The LADS bars are trapezoidal; they can be stacked into planes by alternating the 'wedge' direction
    • Needs new PMTs


"BigBite" HAND
 32x   10 cm x 10  cm  x  100 cm
 32x   10 cm x 12.5cm  x  100 cm
 12x   10 cm x 15  cm  x  100 cm
 12x   15 cm x 25  cm  x  100 cm
 32x    2 cm x 11  cm  x  100 cm
  • Availability: Yes
  • Location: JLab ESB
  • Contact: Doug Higinbotham
  • Reference: Wermus Tech Note
  • Notes:
    • These are available now
    • Will likely need to replace most of the (3") PMTs


GEn E02-013 BigHAND neutron array
UVa:      100x     10 cm x 10 cm x 160 cm
Glasgow:   24x     10 cm x 20 cm x 180 cm
CMU:      120x      5 cm x 15 cm x 180 cm
  • Availability: ??? (there are plans to use the BigHAND array in Hall A)
  • Location: Bldg 64 (tent at NE corner of Accel area)
  • Contacts: Mixed: UVa (Donal Day), CMU (G. Franklin?), Glasgow (J. Annand); Bogdan, Albert (JLab)
  • Reference: BigHAND Geometry], General Documentation]
  • Notes:
    • These are still stored in the BigHAND cartridges in Bldg 64
    • PMT status TBD
    • At our 2013 collaboration meeting Donal mentioned the UVa bars are still available and are still under UVa ownership.


Existing Material at Kent State
8x  10 cm x 51 cm x 100 cm   (actual dimensions: 4" x 20" x 40")
3x  10 cm x 25 cm x 100 cm   (actual dimensions: 4" x 10" x 40")
  • Availability: Yes
  • Location: Kent State
  • Contacts: Bryon Anderson
  • Reference:
  • Notes:
    • Needs cutting and polishing
    • PMTs needed


Existing bars within Collaboration
SUNO    (Mostafa Elaasar):   ??x   1 cm x 10 cm x 100 cm
La Tech (Steve Wells):       ??x  10 cm x 10 cm x 100 cm
  • Availability: Yes
  • Notes:
    • Purchased as test bars with an eye to incorporation into full polarimeter
    • PMTs are included
Retrieved from "https://wiki.jlab.org/E12-11-009/index.php?title=Hardware&oldid=97"