Director - M. Spata
Accelerator Physics - T. Satogata
Previous two weeks (Oct 16-Oct 27) - OPS: BTeam (Oct 17), ATLis cleanup, ORFP update review - ADMIN: Peer review NIM paper - IPAC18: Editorial board support, SPMS support work - JLEIC: Continue assembling documents, pCDR meetings/planning - JLEIC: Booster injection scheme work (with Ed), start writeups on concerns with lattice and injection foil/scheme requirements - ADMIN: Weekly meetings with students (Randy, Eric) - ADMIN: Continue annual review process Next two weeks (Oct 30-Nov 10) - JACOW: Team Meeting travel planning, organization - ADMIN: Weekly meetings with students (Randy, Eric) - JLEIC: Continue assembling documents, pCDR kick-off meeting? - OPS: BTeam (Oct 31, start weekly meets), ORFP update review - JLEIC: Continue Booster injection notes, documentation - IPAC18: Editorial board support, SPMS support work, travel planning for SPC/3 meeting in Jan 2018
Previous two weeks (Oct 16-Oct 27) - ADMIN: Peer review PRAB paper, annual review process - ADMIN: Presentation on Jefferson Lab R&D for NP2N3 delegation - IPAC18: Start organizing next SPB meeting - VACATION: Oct 16-17, Oct 23-24 Next two weeks (Oct 30-Nov 10) - OPS: 12 GeV beam parameter meeting, notes - PERLE: End to end simulation development - IPAC18: Next SPB meeting, notes and planning
Previous two weeks (Oct 16-Oct 27) - ADMIN: Bonn travel, annual review process - JLEIC: continue with tilted solenoid: generate transfer matrix (numerical differentiation); start comparing to conventional modeling - JLEIC: continue responding to any results Chris develops on the simple CCR arcs and writing up the simple arc, but some issues found with forward wavefront, under investigation by Chris - JLEIC: wrote up kicker estimates to provide "straight merger" support, TN-17-052 with Tennant and Benson Next two weeks (Oct 30-Nov 10) - Daresbury travel: prepping presentations (Daresbury Oct 30, Liverpool in following week)
Previous two weeks (Oct 16-Oct 27) - ADMIN: Work with the APS Honors Program administrator and past chair of the APS DPB thesis award committee on review issues - JLEIC: Communicate with Mike Blaskiewicz of BNL and got his codes and relevant materials for instability calculations. Reading associated references. - JLEIC: held meeting with Kirsten Deitrick, Bob Rimmer, Frank Marhauser and Shaoheng Wang on impedance study planning: we agreed to have Kirsten do a survey of impedance results for PEPII e-ring as a starting point, and then work on 3D models and impedance calculation. - JLEIC: held meeting with Kirsten Deitrick, Tim Michalski, Mark Wiseman, Chuck Hutton on status of engineer design, and 3D model of impedance-generating elements. - JLEIC: Help and discuss with David Bruhwiler and Steve Webb of RadiaSoft, and Ilya Pogorelov of Tech-X, in their efforts of forming ideas of SBIR topics that will be beneficial to the beam physics in the JLEIC e-cooler Next two weeks (Oct 30-Nov 10) - JLEIC: Organize impedance meeting with RF group and engineer group (this would be our final informal impedance team, everyone is very enthusiastic!) to get consensus of the approach and plan - ADMIN: Continue with the APS DPB thesis committee work - JLEIC: Test Mike Blaskiewicz’s code and continue to understand the physics it covers
Previous two weeks (Oct 16-Oct 27) - JLEIC: Note large nonlinear dispersion/chromaticity in Booster lattice - JLEIC: Literature search, testing methods of dispersion correction - VACATION: Oct 20 Next two weeks (Oct 30-Nov 10) - JLEIC: Compile gear-change experiment ideas, give presentation - JLEIC: Start updating Booster lattice for higher energy, more space for sextupoles, realistic quadrupole strengths, injection area dispersion tuning - JLEIC: Coordinate Booster injection development work with Todd
Previous two weeks (Oct 16-Oct 27) - JLEIC: redo CSR analysis in CCR "Simple Arc" since I neglected to include "csrdrifts" the first time (oops) - JLEIC: finally cleared up discrepancy between Bmad and other codes (for a quad, anyway) - we believe Bmad uses a drift-kick model and we needed more steps/quad to get the required resolution - JLEIC: finally got Bmad to cooperate and run CSR and CSR shielding - getting a feel for how to run it now - JLEIC: wrote up kicker estimates to provide "straight merger" support, TN-17-052 with Douglas and Benson Next two weeks (Oct 30-Nov 10) - JLEIC: begin TN to document all the work done on CCR "Simple Arc" analysis - JLEIC: begin TN on benchmarking Bmad with elegant CSR models (?)
Previous two weeks (Oct 16-Oct 27) - Dissertation writing: Continue coasting beam chapter, tech note Next two weeks (Oct 30-Nov 10) - Dissertation writing: Hopefully coasting beam chapter, tech note
Accelerator R and D - Y. Zhang
- Completed a new detector region optics design in the electron collider ring, discussed the IP magnets with engineers, will provide the information for their design and arrangement of magnets.
- Learning the code of Bmad for the future spin study.
- Preparing the presentation for the ICFA mini-workshop on dynamics apertures of circular accelerators.
- Miscellaneous: attended the JLEIC R&D meeting, attended JLEIC detector meeting, attended beam-beam code development meeting.
- Prepared for and gave a presentation at the DoE PI meeting.
- Presented at and participated in discussions in meetings with Peter Ratoff and Bruce Dunham.
- Worked with River on crab crossing.
- Participated in JLEIC planning meetings.
- Ion polarization: teleconference with Anatoliy's group.
- Geometry tagging LDRD: finishing paperwork and holding a teleconference with collaborators.
- Preparing draft documentation for JLEIC ion source requirements. Met with Muons, Inc. to discuss the atomic beam polarized ion source SBIR with JLab as the subcontractor. Revised the letter of intent for the SBIR proposal to reflect a proposal focusing on polarized deuterons for JLEIC and polarimetry/polarized gas target applications in CEBAF.
- Data analysis for Geometry Tagging LDRD: Continued data analysis of GEMC simulation data for second data set of particles detected after the ion downstream quad triplet. Presented plots at the biweekly geometry tagging LDRD meeting.
- Began literature search on feedback systems to start characterizing requirements and specifications for feedback systems in JLEIC.
- Attended meeting with Cockcroft Institute director
- Gave a presentation at JLEIC general meeting on the highlights on EIC Accelerator Collaboration Meeting
- Produced a set of slides for David Douglas on JLEIC design so he may used it for a seminar at Cockcroft Institute
- Conceptual Study on JLEIC design
- Many other meetings
Computational Physics - Y. Roblin
-Beam Beam simulations continued. Wrote tools to produce tune maps and FMA maps from BB3D output. -Models now include non-linear maps from the lattices. Longitudinal transport is modeled as linear. Still working on converting MAD-X/ELEGANT maps to BB3D reference frame for longitudinal optics. -Preparing slides for talk on beam-beam results, starting gathering info to write the beambeam cdr chapter meetings with terzic et al regarding ghost development and upcoming paper. -Setting up tools for dynamic aperture scan for the e- ring (with Fanglei)
-getting ready for fall run, reviewing optics, updating decks with new info. -Reviewing procedure for the tritium experiments regarding the ion chamber calibrations -Discussions with HLA of tool prioritization for this fall beam test plans (pathlength tool first) -Hosted visit of the CEBAF injector for the IN2P3/CNRS French delegation
-Simulation for DC cooling in the collider ring with fixed bunch length - Did this simulation again and discussed the result with Jiquang. Different with the previous simulation, this time, as we fix the ion bunch length, we also double the change of the momentum spread due the cooling. The cooling effect was distributed evenly in both the changes of the bunch length and the momentum spread. Now if the bunch length is fixed, all the cooling effect is contributed to the change of momentum spread. After this change, the ion beam momentum spread decreases faster. But the equilibrium emittance and momentum spread remain almost unchanged. -Simulation for the IBS expansion for proton beam at 40, 100, 200 and 1000 GeV - Simulated the IBS expansion process (without cooling) for the proton beam with the latest parameters of highest liuminosity at 40, 100, 200 and 1000 GeV and discussed the result with Yuhong. (1000 GeV case is for comparision only.) If the transverse direction is fully coupled, it is clear that the higher the energy, the weaker the IBS effect and hence the less increase of the emittance, although the IBS rate only shows a weak dependence on the energy. But if there is no coupling, the horizontal emittance at the 200 GeV increases the most. This is because at the lower energy the vertical emittance increases more. Although the increase of the 4d emittance is inversely proportional to the energy, the increase of the horizontal emittance shows positive related with the energy. To get an idea of the coupling effect, simulations were done for 0%, 20%, 40% and 100% transverse coupling. -JSPEC development - Change the output format of JSPEC into text based SDDS format. As tested, the SDDS tools can read the output data from JSPEC. Since it is text SDDS format, not binary SDDS format, we can also easily load the file by other programs, e.g. python, if needed. -Paper on RF heat load and trip rate optimization - Redraw a few pictures as Balsa suggested. Submitted the paper to PRAB. -Paper on Cartesian tensor based FMM - This paper was rejected by JCP. One reviewer recommend “publish without future adjustment”. But the other reviewer rejected our paper simply because the scaling of the Cartesian tensor based FMM has a higher dependence on the rank of the tensor than other FMM kernels, such as the analytical FMM and the kernel independent one. I am not convinced by this review. This fact on the scaling is well known since 2007 when the first paper on Cartesian tensor based FMM was published. But the Cartesian tensor based FMM has been accepted as a piece of the FMM family and some state-of-the-art FMM library includes the kernel. I wrote a draft of the appeal letter. Waiting for some feed back from Li-Shi before I submit it. -Finished reviewing the paper for SISC.
Kirsten Dietrick: Reading:
-PEP-II impedances -RHIC impedances -HLS-II impedances -RTFB transform, magnetized beam emittances (drift and Larmor)
-got 3D field map of C50, C100, 2-cell cavity from Haipeng -ran LERF injector with 1D and 3D maps of FEL booster (2xC50) and UITF/new CEBAF QCM booster (2-cell + C100) -Haipeng sent 1- and 2-cell CEBAF separator cavities -evaluated different methods of calculating beam magnetization; three agree across simulations, confident in calculation (after Cooler meeting) -currently have axially symmetric elements changing magnetization of beam, which may not be physical - currently evaluating
-working on impedance budget, pulling numbers from different machines
-Impedance budget/calculation (Rui, Bob Rimmer, Frank Marhauser, Shaoheng Wang) -Impedance budget/calculation (Rui, Tim Michalski, Mark Wiseman, Chuck Hutton) -Cooler, presented LERF injector results - got questioned about validity of method used to calculate beam magnetization -Seminar: Cockcroft Institute, Peter Ratoff -Cooler, got assigned to simulate separator cavity/dipole combination in GTS (Andrew's merge idea, made simple) -JLEIC
-put in travel requests for IPAC'18 and LINAC'18 (ERL/FEL/COOL in 2019)
Next two weeks: Reading:
-impedances from different machines -why the magnetization is not preserved going through a solenoid of sufficient strength
-evaluate beam magnetization behavior through axially symmetric elements; when and why isn't it preserved? -evaluate difference of maximum solenoid field on or off cathode; maybe talk to GTS group -Andrew's GTS set-up (replace diagnostic beamline with superposition of separator cavity and dipole) -verify accuracy settings in GPT
-continue pulling numbers from different machines -start getting components unique to JLEIC calculated if modeled (or modeled if possible)
-Cooler (Nov. 6th) -JLEIC -Bas's visit (week of Nov. 6th) -possibly Riad's group about beam magnetization
Diagnostic Development - K. Jordan
- Continued working LERF conversion plans; Facilities final ’Scope of Work’m document posted https://wiki.jlab.org/lerf/images/c/ce/SOW_-_LCLS-II_LERF_as_Cryomodule_Testing_Facility.pdf, 480 VAC Electrical panels have been mounted in the gallery
- Wes & I visited SLAC to discuss many topics from computer architecture to vacuum system design. Notes are posted at: https://wiki.jlab.org/lerf/index.php/Oct_19_2017
- Worked mainly on LCLS-II.
- I also am working on reinstalling Labview and the all the appropriate drivers, not trivial, to get the HZDR experiment software working again.
- Principal activities the past two weeks were: preparation for JPos17 submissions (largest time devoted to the antiparallel acceleration as raised by Bogdan W., a surprisingly interesting layout and operations problem) prompted by above, a followup with Bob Legg on the topic of radiation production via antiparallel field emission capture. This investigation asks whether cm-scale offsets potentially available in C100 module placement can materially reduce radiation damage in C100s due to inter-module acceleration.
- More followup on hot-wire anemometry prospect for CEBAF/LCLS-II
LERF - S. Benson