Difference between revisions of "2020-11-5-LeadershipReports"
Jump to navigation
Jump to search
(Created page with "November 5, 2020 Report - Oct 12 - Nov 6''' '''Director - Todd Satogata''' <br> '''Todd Satogata''' '''Previous two weeks (Sept 28 - Oct 9)''' - EIC Meetings (Mana...") |
|||
| Line 119: | Line 119: | ||
'''Max Bruker''' | '''Max Bruker''' | ||
| − | '''Previous ( | + | '''Previous (Oct 12 - Oct 23)''' |
| − | - | + | - Took a close clook at Gang Wang heating. We understand most of the math and underlying assumptions now. |
| − | + | - My tracking code that calculates the space-charge kicks during bunched cooling now uses a 3d charge distribution instead of the 2d one we used to work with. The result is | |
| − | + | closer to reality and allows us to look at both transverse instabilities at the same time; however, the penalty in terms of computing time is unsurprisingly massive. | |
| − | - | + | - The results from the first two bullet points are in reasonable agreement (factor of 1.5). |
| − | + | - All of this has been incorporated in the revised manuscript for the IMP experiment. The current version addresses all comments made by the reviewers. It is now being | |
| − | + | circulated; I do not expect any major revisions at this point. | |
| − | + | '''Next (Oct 26 - Nov 6)''' | |
| − | + | - Work on Bob's RF issues | |
| − | |||
| − | |||
| − | - | ||
| − | |||
| − | - | ||
| Line 161: | Line 156: | ||
'''Bhawin Dhital''' | '''Bhawin Dhital''' | ||
| − | '''Previous two weeks ( | + | '''Previous two weeks (Oct 12 - Oct 23)''' |
| − | - Prepared | + | - Prepared and presented annual review report on dual energy storage ring cooler. Presentation was on October 20,2020. |
| − | - I was working on | + | - I was working on momentum aperture calculation in dual energy storage ring cooler. Learned some python code. Dr Fanglei Lin was helping me greatly to understand those codes and |
| − | + | the physics associated with the momentum aperture. | |
| − | + | '''Next two weeks (Oct 26 - Nov 6)''' | |
| − | '''Next two weeks ( | + | - I will be working on momentum aperture calculation in dual energy storage ring. |
| − | - I will be working on the | + | - Based on the momentum aperture calcualtion, I will calculate the Touschek lifetime in dual energy storage ring. |
| − | - I will present the | + | - I will prepare and present the status and the future plan on dual energy storage ring cooler in upcoming EIC meeting on 6th November, 2020. |
| − | - I will work | + | - I will work on preparation and the submission of tech notes. |
| − | |||
Revision as of 16:50, 6 November 2020
November 5, 2020 Report - Oct 12 - Nov 6
Director - Todd Satogata
Todd Satogata
Previous two weeks (Sept 28 - Oct 9)
- EIC Meetings (Management, RF, crab, cryo, cooling, impedance, OPC, team)
- EIC Cost scrubbing exercises, R&D planning, design review agenda meetings
- EIC Collaboration Worskhop (Oct 7-9), dry runs (Oct 1), training (Oct 5)
- MGMT Meetings (Leadership/Dept Heads, CASA coffee, P&C Oct 28)
- MGMT JLAAC planning
- MGMT AWP updates for FY21, staffing and finance spreadsheets
- OPS start APEL training (Edy), start knowledge document
- ADMIN IMP paper supporting calculation thoughts (with Max)
- ADMIN DPB Exec Council April Meeting program committee meeting
- ODU Weekly Xelera meetings
Next two weeks (Oct 12 - Oct 23)
- EIC Meetings (Management, RF, crab, cryo, cooling, impedance, OPC, team)
- EIC FCC-ee diagnostics collaboration meet (Oct 14)
- EIC Labor planning for FY21
- MGMT Meetings (Leadership/Dept Heads, CASA coffee, JLAAC planning,)
- MGMT JLAAC (Oct 21-23), two talks (EIC overview, ER@CEBAF)
- MGMT AWP updates for FY21, staffing and finance spreadsheets
- MGMT APS membership rosters for DPB membership drive
- ADMIN Edy Nissen accelerator seminar (Oct 15)
- OPS continue APEL training (Edy)
- ODU Weekly Xelera meetings
Alex Bogacz
Previous two weeks (Sept 28- Oct 9)
-
Next two weeks (Oct 12 - Oct 23)
-
Rui Li
Previous two weeks (Sept 14 - Sept 25)
- Write code for modeling of transverse coupled-bunch instability for eSR in EIC
- Going over theories of transverse coupled-bunch instabilities
- Compare the code result with analytical formula
- Participate task force meetings/discussions/activities on impedance in eSR of EIC
- Continue attending meeting and discussion in ALS-U impedance studies
Next two weeks (Sept 28 - Oct 9)
- Continue with the transverse coupled-bunch instability studies
- Attend EIC collaboration workshop
- Participate task force meetings/discussions/activities on impedance in eSR of EIC
- Continue attending meeting and discussion in ALS-U impedance studies
Edy Nissen
Previous two weeks (Sept 14 - Sept 25)
- AI lunch (web, administrative, public affairs, speaker coordination, etc.)
- Sorting out LDRD Year 2 fiasco
- We were denied second year funding because the proposal was seen as too close to the FOA proposal. However, we will still receive funding to keep ODU
postdoc and grad student.
- Present "Introduction to Graph Representation Learning" to AI lunch series
Next two weeks (Sept 28 - Oct 9)
- Vacation
- NVIDIA Deep Learning Institute "AI for Predictive Maintenance" course
Chris Tennant
Previous two weeks (Oct 12 - Oct 23)
- AI lunch (web, administrative, public affairs, speaker coordination, etc.)
- Attended portions of CERN's Inter-Experimental Machine Learning Workshop
- JLAAC: talk preparation and presentation (10/22)
- AI SLAC Seminar: talk preparation and presentation (10/23)
- AIFOA1: complete AWP, kick-off meeting with PIs, contacting people about grad students, develop project Wiki page
- RADSMA: meeting with Radiasoft and initial data exploration of SmartAlarm data
- ARDRML: planning for ARDFML project
- Individual Career Profile and Performance Appraisal
Next two weeks (Oct 26 - Nov 6)
- D&I division meeting
- Attended multiple seminars (T. Powers ATP seminar, R. Pascanu "AI Lunch Series", ML OWLE seminar, AISC webinar)
- Worked on AI Lunch Series Problem of the Quarter (curve-fitting calorimeter data from Hall A)
- AI lunch (web, administrative, public affairs, speaker coordination, etc.)
- AIFOA1: bi-weekly meeting, Wiki development, efforts (unsuccessful to this point) to recruit graduate students, technical roadmap meeting with Lasitha
- ARDFML: data exploration of summer 2020 C100 fault dataset (4,000+ new training examples), writing LDRD report for DOE
Accelerator R & D - Yuhong Zhang
Yuhong Zhang
Previous two weeks (Sept 14 - Sept 25)
-
Next two weeks (Sept 28 - Oct 9)
-
Max Bruker
Previous (Oct 12 - Oct 23)
- Took a close clook at Gang Wang heating. We understand most of the math and underlying assumptions now.
- My tracking code that calculates the space-charge kicks during bunched cooling now uses a 3d charge distribution instead of the 2d one we used to work with. The result is
closer to reality and allows us to look at both transverse instabilities at the same time; however, the penalty in terms of computing time is unsurprisingly massive.
- The results from the first two bullet points are in reasonable agreement (factor of 1.5).
- All of this has been incorporated in the revised manuscript for the IMP experiment. The current version addresses all comments made by the reviewers. It is now being
circulated; I do not expect any major revisions at this point.
Next (Oct 26 - Nov 6)
- Work on Bob's RF issues
Fanglei Lin
Previous two weeks (Sept 14 - Sept 25)
- Prepared and submitted the final report on the task force on novel techniques for ESR polarization improvement
- Benchmarking results from SLICK, SITRO and Bmad
- Prepared a presentation and attended the EIC workshop
- Miscellaneous: attended the dry run meeting for EIC workshop, attended EIC design team meeting, attended the Storage Ring Cooler meeting, attended the EIC Accelerator
Design meeting, attended the EIC general meeting
Next two weeks (Sept 28 - Oct 9)
- Continue the study of electron polarization in the EIC
- Work on the storage ring cooler project
- Prepare a lecture that will be given at the Huazhong University of Science and Technology
Bhawin Dhital
Previous two weeks (Oct 12 - Oct 23)
- Prepared and presented annual review report on dual energy storage ring cooler. Presentation was on October 20,2020.
- I was working on momentum aperture calculation in dual energy storage ring cooler. Learned some python code. Dr Fanglei Lin was helping me greatly to understand those codes and
the physics associated with the momentum aperture.
Next two weeks (Oct 26 - Nov 6)
- I will be working on momentum aperture calculation in dual energy storage ring.
- Based on the momentum aperture calcualtion, I will calculate the Touschek lifetime in dual energy storage ring.
- I will prepare and present the status and the future plan on dual energy storage ring cooler in upcoming EIC meeting on 6th November, 2020.
- I will work on preparation and the submission of tech notes.
Vasiliy Morozov
Previous two weeks (Sept 14 - Sept 25)
- Preparing, attending, presenting the 2nd IR design and serving as a convener at the EIC workshop
- Attending and presenting the EIC and IR design at the detector advisory committee meeting
- Work on the 2nd IR design: footprint optimization, linear optics design, planning
- Polarization simulations: electron and ion polarization lifetime
- Simulations of the spin transparency experiment
Next two weeks (Sept 28 - Oct 9)
- Preparing for the Jefferson lab accelerator advisory committee meeting
- Work on the 2nd IR design
- EIC polarization work: simulations, crabbing effect
- Work on the spin transparency experiment
Amy Sy
Previous two weeks (Sept 14 - Sept 25)
- Submitted input to EIC Biweekly report.
- MADX optimization of integrated solenoid/quadrupole/skew quadrupole fields for a compact spin rotator. Integrating the quadrupole and skew quadrupole fields into the
solenoids
can potentially save ~10 m of space per solenoid, for ~20 m total. Solutions matching to the optics while zeroing out the coupling parameters beta12, alfa12, beta21, and
alfa21 using PTC_TWISS in MADX were very difficult to find when dispersion constraints were also included in the optimization. Preliminary solutions for both solenoid
modules were found by relaxing the horizontal dispersion and dispersion prime constraints on the match. The coupling parameters are about an order of magnitude larger than
in the original lattice, and further work is needed to study the implications of this on the beam dynamics in the spin rotator.
- Attended meetings on revisions of the IMP experiment paper.
Next two weeks (Sept 28 - Oct 9)
- Collected and edited inputs to the September 2020 EIC Design Update Newsletter.
- MADX optimization of integrated solenoid/quadrupole/skew quadrupole fields for a compact spin rotator. Continued optimization to reduce the magnitudes of the coupling
parameters and final quadrupole strengths.
- Attended the EIC Workshop on potential international collaborations.
Computational Physics - Yves Roblin
Yves Roblin
Previous two weeks (Sept 14 - Sept 25)
- rayTrace
- Developing analysis tools based on beam moments
- BTeam coordination
- FSD, target safety meetings
- Reviewing possible optics for SBS.
Next two weeks (Sept 28 - Oct 9)
- vacation
- rayTrace
- Ongoing development
- BTeam coordination
- Technote writing
- Preparation for upcoming physics readiness review
Randi Gamage
Previous two weeks (Sept 14 - Sept 25)
-
Next two weeks (Sept 28 - Oct 9)
-
River Huang
Previous two weeks (Sept 14 - Sept 25)
- Based on A. Piwinski, we tried to accelerate the calculation of the intra-beam scattering in JSPEC.
Next two weeks (Sept 28 - Oct 9)
- JSPEC: Starting re-defining commands of “section run” so that optimizing the efficiency of JSPEC. Attending EIC meeting.
Isurumali Neththikumara
Previous two weeks (Sept 14 - Sept 25)
- Read articles on ER@CEBAF and CEBAF accelerator.
- Installed OptiM and started to get familiar with it.
Next two weeks (Sept 28 - Oct 9)
- Read on ‘Coupled betatron motion’.
- Started to gather information on RayTrace.
Dennis Turner
Previous two weeks (Sept 14 - Sept 25)
- rayTrace
- Tested data collector during Beam Studies
- Fixed bugs found during testing
- Developing analysis tools
- AI/SRF FOA budget meeting
- Medcon 5 training update
- UITF
- Provided help with qsUtility and optics measurements
- Got ced2elegant working with UED
- Created elegant deck for the rest of the UITF beamlines and populated the UED Optics workspace
- AIPINJ
- Imported the elegant deck for Phase 1 into the CED InjUpgrade workspace
- Attended AI Lunch Series, Accelerator Seminars, and Radiasoft AI webinar.
- Attended BTeam, AIPINJ meetings
Next two weeks (Sept 14 - Sept 25)
- rayTrace
- Further tweaks to the data collector tool
- Further exploration and development of analysis code
- Started working on the technote
- UITF
- Work with UITF folks to update the elegant deck and UED to match what was found from the latest beamline walks
- AIPINJ
- Tweaked the InjUpgrade workspace to get all the vacuum elements and such in correct order
- Attend BTeam, CASA, AIPINJ, AI/SRF meetings
- Attend AI Lunch Series, Accelerator Seminars, and other opportunities.
He Zhang
Previous two weeks (Sept 14 - Sept 25)
- Ran a bunch of simulation with various groups of parameters for the IMP experiment. Some results agree well with the experiment.
- Added a few small feature to JSPEC2
Next two weeks (Sept 28 - Oct 9)
- Finish debugging and testing the IBS formula.
- Test JSPEC python wrapper.
- Prepare a talk for Snowmass21 planning meeting.
- Start coding non-Gaussian IBS calculation.
Diagnostic Development - Kevin Jordan
Kevin Jordan
Previous two weeks (Sept 14 - Sept 25)
-
Next two weeks (Sept 28 - Oct 9)
-
Joe Gubeli
Previous two weeks (Oct 12 - Oct 23)
- Isotopes –Working on a design for a RADCON experiment with gallium. Creating a model of the new 1-5kW Isotope assembly design in order to run a thermal simulation. Had
discussions on how to proceed with the 50kW design
- ARDDOT - Started to assembly the three ARC 7 SLMs. Waiting on a few parts to assembly the alignment fixtures. Have completed the assembly of all 20 CEBAF viewers
assemblies. Need to set the focus of the cameras before they are ready for installation.
- ACCTVL -Attend the FY21 DOE SBIR/STTR review as a panelist.
Next two weeks (Sept 28 - Oct 9)
- Isotopes –Continue to develop a 50kW target design. Finish the RADCON experiment setup. Thermal simulations of the 1-5kW design.
- ARDDOT – Work on assembling the three ARC 7 SLMs. Set the camera focus for the CEBAF viewer assemblies.
Michael Tiefenback
Previous two weeks (Sept 14 - Sept 25)
-
Next two weeks (Sept 28 - Oct 9)
-
CASA Fellows
LERF - Steve Benson
Previous two weeks (Oct 12 - Oct 23)
- Wrote up analysis of isotope spectrometer.
- Derived and passed on AWP information for Cooling FOA project.
- Submitted Tech. note for chromatics of Bates and inverse Bates bends (Douglas work).
- Attended some talks at the RHIC retreat to gain information on the CeC tests.
- Provided AWP information for possible isotope scenarios.
- Reviewed CeC quarterly report.
Next two weeks (Oct 26 - Nov 6)
- Write up and submit quarterly report for the Electron Cooling FOA
- Met with videographers to determine what they can film in the LERF.
- Put together budget information for the Isotope quarterly and get it verified by finance.
- Start up alternate photon source group meetings.
- Assist in video shoot for LERF for new lab video.
- Assist in preparing materials for ERR of 5 kW operation
Andrew Hutton
Previous two weeks (Sept 14 - Sept 25)
- Isotope Irradiations took place Sept 13-16. This involved a stack of Nickel and Vanadium foils and isotopically pure Gallium71 in a powdered oxide form for calibration.
We also irradiated a solid graphite block to obtain approval for using graphite as the crucible for the later irradiation of natural liquid gallium. We obtained approval
the same day (actually after hours in the evening) and irradiated the gallium for a total of 26 hours. The LERF was not being cooperative and we lost 12 hours to an RF
station, but because of the rainfall from the SALLY remnants, we were able to extend the run (too dangerous to remove the shielding blocks). The results appear to confirm
the FLUKA results for Gallium, but we are pretty sure that FLKA gives the wrong results for Nickel (one of the daughters has twice the production rate, the other one
half). We are still having meetings to get all of the calibrations correct in view of a publication.
- Lila presented the work she did at Jefferson Lab as an REU student at the "The DOE Isotope Program’s Virtual Seminar Series: On the Horizon: Novel Isotopes and Future
Leaders.” I worked with her to make sure she did well.
- I spent a lot of time looking at the harmonic kicker for the EIS RCS; in my opinion, too much effort has been spent on optimizing the RF to avoid problems that I do not
believe are problems. I prepared and presented a talk on simplifying the harmonic kicker design for the EIC.
- We received preliminary approval for the PERLE ICRADA from the DOE - submitted on September 3, pre-approval obtained on September 23, faster than it took to go through the
system at Jefferson Lab. It required two Jefferson lab signatures, Andrei and Drew; both have signed. Now it goes to IJCLab where Achille Stocchi, the Director, is eager
to sign it.
- There was a VNECA meeting scheduled and I read through the draft Governor’s Statement in preparation. My suggestions from the first draft had all been incorporated and I
actually found a typo in the latest version (the authors were delighted!). The meeting was postponed at the last minute.
Next two weeks (Sept 28 - Oct 9)
- EIC: After giving a presentation on there harmonic kicker, I updated my ideas and sent them out in an email. I received no feedback! I also attended the EIC
Collaboration Meeting which was actually considerably better than I had anticipated. I attended the EIC Collaboration Meeting dry runs and then the Collaboration Meeting
itself, which was actually considerably better than I had anticipated.
- Isotopes: we are still trying to understand the irradiation results, and have had several meetings to clarify things. In parallel, we are continuing design work for a
50kW target. The latest idea from Pavel Degtiarenko is to use an external heat exchanger and pump the liquid gallium around with a magnetic pump. So far, the idea looks
better than our previous design.