Difference between revisions of "Beamline element details"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
*Assembly with brazed cooling lines: 28921-D-0001/0002: https://misportal.jlab.org/jlabDocs/docDownload/11580 | *Assembly with brazed cooling lines: 28921-D-0001/0002: https://misportal.jlab.org/jlabDocs/docDownload/11580 | ||
*Modifications: found drawings with 1 mm hole, physical parts have 2 and 4 mm holes from install in CEBAF, opening both to 6 mm then rechampfering to maintain 0.125" thickness at hole. | *Modifications: found drawings with 1 mm hole, physical parts have 2 and 4 mm holes from install in CEBAF, opening both to 6 mm then rechampfering to maintain 0.125" thickness at hole. | ||
| + | |||
| + | ==chopper== | ||
| + | *chopping chamber design drawings: VAC5550124-1015 (not present in engineering database) | ||
| + | **Chopping Chamber outer shell assembly [[File:VAC5550124-1015.pdf]] | ||
| + | **Chopping Chamber end flanges [[File:VAC5550124-1018.pdf]] | ||
| + | **Chopping Chamber main body [[File:VAC5550124-1019.pdf]] | ||
| + | **Chopping Chamber support | ||
Revision as of 13:31, 7 December 2016
apertures
- Original aperture design 58432-C-0340: https://misportal.jlab.org/jlabDocs/docDownload/7973
- Assembly with brazed cooling lines: 28921-D-0001/0002: https://misportal.jlab.org/jlabDocs/docDownload/11580
- Modifications: found drawings with 1 mm hole, physical parts have 2 and 4 mm holes from install in CEBAF, opening both to 6 mm then rechampfering to maintain 0.125" thickness at hole.
chopper
- chopping chamber design drawings: VAC5550124-1015 (not present in engineering database)
- Chopping Chamber outer shell assembly File:VAC5550124-1015.pdf
- Chopping Chamber end flanges File:VAC5550124-1018.pdf
- Chopping Chamber main body File:VAC5550124-1019.pdf
- Chopping Chamber support