Difference between revisions of "2020 Steel Shield Experiments at GTS"
Jump to navigation
Jump to search
| Line 13: | Line 13: | ||
# <u>Gun Voltage</u>: 90 kV (should be fine for experiment purposes) | # <u>Gun Voltage</u>: 90 kV (should be fine for experiment purposes) | ||
# <u>Gun Solenoid Current</u>: 150 A | # <u>Gun Solenoid Current</u>: 150 A | ||
| − | # <u>Anode Voltage</u> 1 kV | + | # <u>Anode Voltage</u>: 1 kV |
| − | # <u>Beam Current</u> 500 uA or higher (to ensure sufficient measured intensity from recombining ions) | + | # <u>Beam Current</u>: 500 uA or higher (to ensure sufficient measured intensity from recombining ions) |
| − | # <u>Gun Vacuum Levels</u> Higher pressure -> higher ion production rate -> higher number of recombining ions. | + | # <u>Gun Vacuum Levels</u>: Higher pressure -> higher ion production rate -> higher number of recombining ions. |
== Experimental Procedure == | == Experimental Procedure == | ||
Revision as of 12:25, 19 November 2020
Info on proposed steel shield experiments using the T-Gun at GTS
Previous Parameters
- Gun Voltage: 100 kV
- Gun Solenoid Current: 150 A. Experiments varied the current between 30 A and 150 A
- Anode Voltage: 1 kV (961 V). Experiments varied the anode bias voltage between 388 V and 961 V
- Beam Current: 100-500 uA
- Gun Vacuum Levels: Usually > 1e-9 A ion pump current at the gun
Proposed Parameters
- Gun Voltage: 90 kV (should be fine for experiment purposes)
- Gun Solenoid Current: 150 A
- Anode Voltage: 1 kV
- Beam Current: 500 uA or higher (to ensure sufficient measured intensity from recombining ions)
- Gun Vacuum Levels: Higher pressure -> higher ion production rate -> higher number of recombining ions.