Difference between revisions of "February 23, 2016 - Elegant Layout"
Jump to navigation
Jump to search
(8 intermediate revisions by the same user not shown) | |||
Line 2: | Line 2: | ||
===kev.ele=== | ===kev.ele=== | ||
− | + | # uses beam line G2U which extends from marker PARM 0.20 m downstream of photocathode to valve upstream of cryounit VBV1M01 | |
− | G2U element names are entirely nomenclature per ME song sheet to be released | + | # G2U element names are entirely nomenclature per ME song sheet to be released Dwg. JL0024891 |
− | + | # present initial conditions are based on CEBAF 100-130 keV gun with typical laser spot size | |
− | output file kev.out shows floor layout where X=0, Y=1.0668m, Z=0m is | + | # more realistic initial conditions will be generated for 200 keV and 350 keV inverted guns with ball electrode |
+ | # Wien filter set for 0 deg spin rotation (i.e. a drift) is used | ||
+ | # 1497 MHz chopping cavities are set to produce 1mm deflection at center of chopper | ||
+ | # 750 MHz bunching cavity is set for modest bunching, to be studied with longitudinal code | ||
+ | # output file kev.out shows floor layout where X=0, Y=1.0668m, Z=0m is at "START POINT" on Dwg. JL0024891 | ||
===mev.ele=== | ===mev.ele=== | ||
− | input file uses beam line U2HD which extends from valve upstream cryounit VBV1M01 to final beam dump IDL5M01 | + | # input file uses beam line U2HD which extends from valve upstream cryounit VBV1M01 to final beam dump IDL5M01 |
− | U2HD element names are presently a mix of generic names and nomenclature, until optics and ME design is refined | + | # U2HD element names are presently a mix of generic names and nomenclature, until optics and ME design is refined |
− | input conditions are based on CEBAF emittance measurements at 7 MeV/c just after cryounit | + | # MeV transport line in three sequential sections based on guidance from Dave Douglas: |
− | note that cryounit is presently treated as a drift, until dimensions for 2-cell and 7-cell are known | + | * 4-quad telescope to match from cryounit into chicane |
− | output file mev.out shows (continued) floor layout where X=0, Y=1.0668m, Z=0m is | + | * 3-quad vertical chicane |
+ | * 4-quad telescope to set spot at HDIce | ||
+ | # Optimization of quadrupoles occurs in three steps: | ||
+ | * First, the chicane is optimized to remove dispersion at center of chicane, matching at marker MKMATCH | ||
+ | * Second, the telescope from cryounit to chicane is optimized to control spot size at center of chicane, matching at marker MKMATCH | ||
+ | * Third, the telescope after chicane is optimized to control spot size at entrance of HDIce, matching at marker MKFINAL | ||
+ | # input conditions are based on CEBAF emittance measurements at 7 MeV/c just after cryounit | ||
+ | # note that cryounit is presently treated as a drift, until dimensions for 2-cell and 7-cell are known | ||
+ | # output file mev.out shows (continued) floor layout where X=0, Y=1.0668m, Z=0m is at "START POINT" on Dwg. JL0024891 | ||
+ | |||
+ | ===uitf.lte=== | ||
+ | # Elegant lattice file for keV and MeV sections |
Latest revision as of 11:42, 29 February 2016
This version of UITF is archived at /a/itfdata/uitf/elegant/160223/
kev.ele
# uses beam line G2U which extends from marker PARM 0.20 m downstream of photocathode to valve upstream of cryounit VBV1M01 # G2U element names are entirely nomenclature per ME song sheet to be released Dwg. JL0024891 # present initial conditions are based on CEBAF 100-130 keV gun with typical laser spot size # more realistic initial conditions will be generated for 200 keV and 350 keV inverted guns with ball electrode # Wien filter set for 0 deg spin rotation (i.e. a drift) is used # 1497 MHz chopping cavities are set to produce 1mm deflection at center of chopper # 750 MHz bunching cavity is set for modest bunching, to be studied with longitudinal code # output file kev.out shows floor layout where X=0, Y=1.0668m, Z=0m is at "START POINT" on Dwg. JL0024891
mev.ele
# input file uses beam line U2HD which extends from valve upstream cryounit VBV1M01 to final beam dump IDL5M01 # U2HD element names are presently a mix of generic names and nomenclature, until optics and ME design is refined # MeV transport line in three sequential sections based on guidance from Dave Douglas: * 4-quad telescope to match from cryounit into chicane * 3-quad vertical chicane * 4-quad telescope to set spot at HDIce # Optimization of quadrupoles occurs in three steps: * First, the chicane is optimized to remove dispersion at center of chicane, matching at marker MKMATCH * Second, the telescope from cryounit to chicane is optimized to control spot size at center of chicane, matching at marker MKMATCH * Third, the telescope after chicane is optimized to control spot size at entrance of HDIce, matching at marker MKFINAL # input conditions are based on CEBAF emittance measurements at 7 MeV/c just after cryounit # note that cryounit is presently treated as a drift, until dimensions for 2-cell and 7-cell are known # output file mev.out shows (continued) floor layout where X=0, Y=1.0668m, Z=0m is at "START POINT" on Dwg. JL0024891
uitf.lte
# Elegant lattice file for keV and MeV sections