Difference between revisions of "GTS meeting 10 09 17"

From Ciswikidb
Jump to navigation Jump to search
 
(4 intermediate revisions by 2 users not shown)
Line 1: Line 1:
  
 
* Remaining tasks before shutdown:
 
* Remaining tasks before shutdown:
# Slit-Viewer emittance measurement: Slit1 and Viewer3 with focus lens
+
# Measure lifetime for: 0 A, 50 A, 100 A, 150 A, 200 A, 300 A, 400 A (Gun HV=300 kV, I=3.0 mA) - '''''Done''''' - [https://logbooks/entry/3487283]
 
# Measure lifetime with a larger laser size (~rms=0.5 mm)
 
# Measure lifetime with a larger laser size (~rms=0.5 mm)
# Measure lifetime for: 0 A, 50 A, 100 A, 150 A, 200 A, 300 A, 400 A (Gun HV=300 kV, I=3.0 mA) - '''''Done''''' - [https://logbooks/entry/3487283]
 
 
# Lifetime vs biased anode
 
# Lifetime vs biased anode
 +
# Slit-Viewer emittance measurement: Slit1 and Viewer3 with focus lens
  
  
* Why is photocathode lifetime limited (100 - 300 C)?
+
* What is meant to measure emittance, by Cristhian Valerio, Universidad de Sinaloa, Mexico:
# Laser heating and QE decay
 
# Laser size too small?
 
 
 
* What is means to measure emittance, by Cristhian Valerio, Universidad de Sinaloa, Mexico
 
 
#[[Media:PastedGraphic-2.tiff]]
 
#[[Media:PastedGraphic-2.tiff]]
 +
#[[Media:PastedGraphic-3.tiff]]
 +
#[[Media:PastedGraphic-4.tiff]]
 +
# But if the laser spot is off center, we are limited to measure the "system" emittance, rather than the intrinsic emittance, which would require the laser spot at the center of the cathode.[[Media:PastedGraphic-1.pdf]]

Latest revision as of 09:04, 9 October 2017

  • Remaining tasks before shutdown:
  1. Measure lifetime for: 0 A, 50 A, 100 A, 150 A, 200 A, 300 A, 400 A (Gun HV=300 kV, I=3.0 mA) - Done - [1]
  2. Measure lifetime with a larger laser size (~rms=0.5 mm)
  3. Lifetime vs biased anode
  4. Slit-Viewer emittance measurement: Slit1 and Viewer3 with focus lens


  • What is meant to measure emittance, by Cristhian Valerio, Universidad de Sinaloa, Mexico:
  1. Media:PastedGraphic-2.tiff
  2. Media:PastedGraphic-3.tiff
  3. Media:PastedGraphic-4.tiff
  4. But if the laser spot is off center, we are limited to measure the "system" emittance, rather than the intrinsic emittance, which would require the laser spot at the center of the cathode.Media:PastedGraphic-1.pdf