Difference between revisions of "UITF Wien Filter"
Jump to navigation
Jump to search
(Created page with "Steps for building Wien filter: 1. Fabricate coils, magnet (1010 steel), nickel (alloy 200) magnet mirror, vacuum chamber 2. Anneal nickel 3. Assemble magnet with end flange...") |
|||
| Line 1: | Line 1: | ||
Steps for building Wien filter: | Steps for building Wien filter: | ||
| − | + | #Fabricate coils, magnet (1010 steel), nickel (alloy 200) magnet mirror, vacuum chamber | |
| − | + | #Anneal nickel | |
| − | + | #Assemble magnet with end flanges (if possible) | |
| − | + | 3Measure magnetic field profile (average a few passes) on centerline | |
| − | + | 3Cut electrode profile to match magnetic profile | |
| − | + | #EP electrodes | |
| − | + | #Assemble with electrodes | |
Revision as of 13:55, 19 August 2015
Steps for building Wien filter:
- Fabricate coils, magnet (1010 steel), nickel (alloy 200) magnet mirror, vacuum chamber
- Anneal nickel
- Assemble magnet with end flanges (if possible)
3Measure magnetic field profile (average a few passes) on centerline 3Cut electrode profile to match magnetic profile
- EP electrodes
- Assemble with electrodes