Difference between revisions of "February 23, 2016 - Elegant Layout"
Jump to navigation
Jump to search
Line 4: | Line 4: | ||
# uses beam line G2U which extends from marker PARM 0.20 m downstream of photocathode to valve upstream of cryounit VBV1M01 | # uses beam line G2U which extends from marker PARM 0.20 m downstream of photocathode to valve upstream of cryounit VBV1M01 | ||
# G2U element names are entirely nomenclature per ME song sheet to be released | # G2U element names are entirely nomenclature per ME song sheet to be released | ||
− | # | + | # present initial conditions are based on CEBAF 100-130 keV gun with typical laser spot size |
+ | # more realistic initial conditions will be generated for 200 keV and 350 keV inverted guns with ball electrode | ||
+ | # Wien filter set for 0 deg spin rotation (i.e. a drift) is used | ||
+ | # 1497 MHz chopping cavities are set to produce 1mm deflection at center of chopper | ||
+ | # 750 MHz bunching cavity is set for modest bunching, to be studied with longitudinal code | ||
# output file kev.out shows floor layout where X=0, Y=1.0668m, Z=0m is placed at "START POINT" on drawing JL0024891 | # output file kev.out shows floor layout where X=0, Y=1.0668m, Z=0m is placed at "START POINT" on drawing JL0024891 | ||
Line 10: | Line 14: | ||
# input file uses beam line U2HD which extends from valve upstream cryounit VBV1M01 to final beam dump IDL5M01 | # input file uses beam line U2HD which extends from valve upstream cryounit VBV1M01 to final beam dump IDL5M01 | ||
# U2HD element names are presently a mix of generic names and nomenclature, until optics and ME design is refined | # U2HD element names are presently a mix of generic names and nomenclature, until optics and ME design is refined | ||
+ | # MeV transport line is a 4-quad telescope, followed by a 3-quad chicane to control dispersion, followed by a 4-quad telescope to set spot at HDIce | ||
+ | # Optimization occurs in three steps: | ||
+ | * Chicane is optimized to remove dispersion at center of chicane | ||
+ | * First telescope is optimized to control spot size at center of chicane | ||
+ | * Second telescope is optimized to control spot size at entrance of HDIce | ||
# input conditions are based on CEBAF emittance measurements at 7 MeV/c just after cryounit | # input conditions are based on CEBAF emittance measurements at 7 MeV/c just after cryounit | ||
# note that cryounit is presently treated as a drift, until dimensions for 2-cell and 7-cell are known | # note that cryounit is presently treated as a drift, until dimensions for 2-cell and 7-cell are known | ||
# output file mev.out shows (continued) floor layout where X=0, Y=1.0668m, Z=0m is placed at "START POINT" on drawing JL0024891 | # output file mev.out shows (continued) floor layout where X=0, Y=1.0668m, Z=0m is placed at "START POINT" on drawing JL0024891 |
Revision as of 18:00, 23 February 2016
This version of UITF is archived at /a/itfdata/uitf/elegant/160223/
kev.ele
# uses beam line G2U which extends from marker PARM 0.20 m downstream of photocathode to valve upstream of cryounit VBV1M01 # G2U element names are entirely nomenclature per ME song sheet to be released # present initial conditions are based on CEBAF 100-130 keV gun with typical laser spot size # more realistic initial conditions will be generated for 200 keV and 350 keV inverted guns with ball electrode # Wien filter set for 0 deg spin rotation (i.e. a drift) is used # 1497 MHz chopping cavities are set to produce 1mm deflection at center of chopper # 750 MHz bunching cavity is set for modest bunching, to be studied with longitudinal code # output file kev.out shows floor layout where X=0, Y=1.0668m, Z=0m is placed at "START POINT" on drawing JL0024891
mev.ele
# input file uses beam line U2HD which extends from valve upstream cryounit VBV1M01 to final beam dump IDL5M01 # U2HD element names are presently a mix of generic names and nomenclature, until optics and ME design is refined # MeV transport line is a 4-quad telescope, followed by a 3-quad chicane to control dispersion, followed by a 4-quad telescope to set spot at HDIce # Optimization occurs in three steps: * Chicane is optimized to remove dispersion at center of chicane * First telescope is optimized to control spot size at center of chicane * Second telescope is optimized to control spot size at entrance of HDIce # input conditions are based on CEBAF emittance measurements at 7 MeV/c just after cryounit # note that cryounit is presently treated as a drift, until dimensions for 2-cell and 7-cell are known # output file mev.out shows (continued) floor layout where X=0, Y=1.0668m, Z=0m is placed at "START POINT" on drawing JL0024891