Difference between revisions of "May 19, 2017 - 200kV gun upgrade meeting"
Jump to navigation
Jump to search
Line 8: | Line 8: | ||
===Gun2 NEG Tube=== | ===Gun2 NEG Tube=== | ||
− | * | + | * Final NEG tube design => [[media:NEGTUBE_MAY03.pdf]] |
− | :M20 Old Assembly Modification [[media:0990.pdf]] | + | : 4.5" rotatable, 2-1/2" bore => ordered |
− | :M20 New Assembly Can [[media:0991.pdf]] | + | : 6" to 4-1/2" reducers => ordered |
− | :M20 New Assembly 6.00 x 4.500 reducer flange[[media:0.992.pdf]] | + | : (3) FH sent to MMF for mapping |
+ | * BPM process : Fabricate, Clean, Leak Test, Optical Align, Electrical Acceptance, Gabou Line, Install | ||
+ | : (2) M20's : Fab, Clean, Leak, Optical, Gabou | ||
+ | : (2) M20's (Greg Marble spares) : Fab, Clean, Leak, Optical, Electrical | ||
+ | ::M20 Old Assembly Modification [[media:0990.pdf]] | ||
+ | ::M20 New Assembly Can [[media:0991.pdf]] | ||
+ | ::M20 New Assembly 6.00 x 4.500 reducer flange[[media:0.992.pdf]] | ||
===Gun3 Removal and Diagnostics Chamber Installation === | ===Gun3 Removal and Diagnostics Chamber Installation === |
Revision as of 10:11, 17 May 2017
200kV Gun
- Task and Timeline Gantt chart => media:170421_CHG.pdf
- The electrode is out of the machine shop
- The key was filed to prevent it from being jammed in the electrode
- With the key fixed, the electrode assembly was measured by S&A, with and w/o the key. Danny M. compared to the model: "so the height is correct and the pitch is off 0.008 inches. those numbers seem o.k. much better than the previous numbers, and we know the key fits o.k."
- Bubba polished the electrode with 320 grit sandpaper in prep for barrel polishing with corncob.
- The electrode has been ultrasonic cleaned in micro in preparation for vacuum firing to 900C.
Gun2 NEG Tube
- Final NEG tube design => media:NEGTUBE_MAY03.pdf
- 4.5" rotatable, 2-1/2" bore => ordered
- 6" to 4-1/2" reducers => ordered
- (3) FH sent to MMF for mapping
- BPM process : Fabricate, Clean, Leak Test, Optical Align, Electrical Acceptance, Gabou Line, Install
- (2) M20's : Fab, Clean, Leak, Optical, Gabou
- (2) M20's (Greg Marble spares) : Fab, Clean, Leak, Optical, Electrical
- M20 Old Assembly Modification media:0990.pdf
- M20 New Assembly Can media:0991.pdf
- M20 New Assembly 6.00 x 4.500 reducer flangemedia:0.992.pdf
Gun3 Removal and Diagnostics Chamber Installation
- May 8-12 => Remove and replace Gun3 ATLIS task
Eliminating Gun Switch Software
- April 28 => Remove gun switch software ATLIS task
- Software removed and interlocks tested ELOG entry
- Yet to do a) remove VBV3I02 from special interlock and b) swap PLC for relays