Difference between revisions of "March 3, 2020 - Modeling"
Jump to navigation
Jump to search
| Line 10: | Line 10: | ||
;Injector alignment | ;Injector alignment | ||
From: C. Curtis => I have included the e-mail thread where the offsets were discussed. These are 1.2mm in X and 1.5mm in Z. The discontinuity occurs between the QJ0L02 and QJ0L03 girders. Since we will need to re-align the new components upstream of the Chopper anyway, I would propose re-aligning the remaining elements upstream of QJ0L03 such that they are compatible with the rest of the accelerator. | From: C. Curtis => I have included the e-mail thread where the offsets were discussed. These are 1.2mm in X and 1.5mm in Z. The discontinuity occurs between the QJ0L02 and QJ0L03 girders. Since we will need to re-align the new components upstream of the Chopper anyway, I would propose re-aligning the remaining elements upstream of QJ0L03 such that they are compatible with the rest of the accelerator. | ||
| − | |||
;Any other status updates | ;Any other status updates | ||
Revision as of 14:09, 3 March 2020
Agenda
- GPT simulations
- Elegant simulations
- FG magnet spacing
/group/inj_group/Field_Maps/Solenoids/FG
- Injector alignment
From: C. Curtis => I have included the e-mail thread where the offsets were discussed. These are 1.2mm in X and 1.5mm in Z. The discontinuity occurs between the QJ0L02 and QJ0L03 girders. Since we will need to re-align the new components upstream of the Chopper anyway, I would propose re-aligning the remaining elements upstream of QJ0L03 such that they are compatible with the rest of the accelerator.
- Any other status updates