Phase 1 & SAD ATLIS Tasks

Open, complete, re-scheduled statuses updated 5/7/21

AIPINJ

• Open Insertable Upgrade on iocin3 for viewers, faraday cup, and yag viewer
• Open AIPINJ: temporary 5D beam line removal
• Open Removal/Er-installation of Part of 5D line in Inj.
• Open Injector Wien Filter - system upgrade (2020 SAD)
• Open Mat'l Handling and Installation for Phase I of Inj. Upgrade
• Open Remove and re-install BPM's Gun to chopper
• Open Pedestal Location Surveys
• Open Install Chopper SSA's
• Open Remove and calibrate current monitoring electronics
• Open Install and Commission Wien filter Power Supplies
• Open Survey support for Injector Upgrade
• Open DC Power Support for Injector Upgrade
• Open Perform Installation work for newly added Injector bpm during 2020 SAD

• Complete "SAD 2020" Injector Harp System - interface controls upgrade
• Complete STAC5 A1 Aperture Epics Controls
• Complete Testing Wien HV Controls at UITF
• Complete Removal of PSS kicker magnet injector segment
• Complete Gun high voltage conditioning
• Complete Chopper SSA LCW
• Complete IOCSE11 & IOCINSE4 BPM Controls Update
• Complete Install PSS jumpers for laser work at the Injector
• Complete Relocate Recepacles Downstairs in Injector Bldg.53
• Complete Install Lifting Plates in Ijn. Ceiling to Support 1/4 CM Swap
• Complete 5D cold cathode gauge repositioning
• Complete Add UHV ion pumps to VBV0I02 interlock chain

CIS SAD Tasks

• Open New Gun2 loading chamber
• Placeholder for Tim Minga to test laser room smoke detector alarm to MCC/Guard
• Placeholder Fix IHWP readback during SAD

• Complete Injector Macropulse/Tune Mode Generator Modification
• Complete CEBAF Lead Bricks : Collect, Sort, Clean, Paint, Store

Injector Related SAD Tasks

• Open Penetration Drops
• Open LLRF Diagnostics and Repairs in the Linacs and Injector
• Open April 2021 10 Amp System PM Maintenance
• Open Annual Crane Inspections Site wide May 17- May 27 2021
• Open VME FSD Master Card Commisioning
• Open 429 mHz Amp & Power supply being pulled for repair
• Open 2020 SAD Injector / North Linac 30 Hz System checks
• Open PSS Injector Interface Chassis removal
• Open PSS Injector Segment PLC Upgrade
• Open PSS CAMAC Relay cards replacement with VME versions for Injector and BSY
• Open I&C Injector Camac to Vme and camera upgrade
• Open I&C Upgrade harps to PC104
• Open I&C Accelerator network re-survey
• Open FAC Tunnel Fire Alarm and Suppression Replacement
• Open Apply labels to I&C components during 2020 SAD
• Open Neutron Detector System Installation (SAD 2020)
• Open UHV Power Supply Replacement (ISB)
• Open Trim Utility Chassis Upgrade - All CEBAF Trim Racks
• Open SAD 2020: P.M. of 24V Vacuum Power Supply Chassis
• Open VME crate upgrade to IOCIN3
• Open Insertable CAMAC to VME EPICS Controls upgrade Injector (iocin1->iocin1b)
• Open Software Controls PSS Injector and North Linac changes on iocsoftsafe2
• Open Perform Basic PM of 45 MeV spectrometer Power Supply
• Open 2020 SAD and Beyond CAMAC / VME PM maintenance and repairs
• Open Change transformer tap settings - oil filled transformers
• Open Injector Survey Monuments install
• Open Remove Old 45MeV Dump and re-Install at End of SAD
• Open Leak Repairs inside of HPA cabinets (1L02-8, 1L06-8, 1L09, and 0L04)

• Complete Connect bpm cables inside injector Laser Yellow Box *revised
• Complete B53 (INJ SB) Panelboard PM
• Complete iocin1 - VME crate replacement
• Complete Study - Site Ground Loop
• Completed Shutdown of Panel I-BT in the Injector
• Completed Remove old Sonitrol system hardware from NA and SA
• Complete Install Ion Pump HV cables and mount Junction boxes on cable trays NL and INJ

• Rescheduled Injector (prebuncher, buncher and choppers)- LLRF systems upgrade to 3.0 version
• Rescheduled I&C Upgrade existing ItoV System with ItoV VME cards