2021-05-12

Meeting Information

Connecting

To connect to the meeting, please do the following: Time: Wednesday at 9:00 AM EST.

1. To join via a Web Browser, go to the page [1] https://bluejeans.com/946721076.
2. To join via Polycom room system go to the IP Address: 199.48.152.152 (bjn.vc) and enter the meeting ID: 946721076.
3. To join via phone, use one of the following numbers and the Conference ID: 946721076.
   • Dial Either +1 408 740 7256 or +1 888 240 2560 for US or Canada

Agenda

Schedule

Rough timetable:

1. CMTF tests with C75-1 (late-March - early-June).
2. UITF beam line modification
3. Supplementary Shielding Installation: Mid-June
4. Beamline Commissioning / Test Plans / Shielding Verification
5. 7/26/21 Start Hot Check-out
6. Commission new beam line and execute experiment

Long Term Schedule (McCaughan) Strawman

New items for discussion:

Short term schedule update:
This week:

• Component disconnects (Mostly complete)
• Diagnose Chopper slit (Complete - gear box issue; on A5 controls/STAC5 now. Thanks to Scott!)
• Post 2-d schematic on beam line to guide installation (Completed and posted)
• Install more brackets and flange supports on 80/20 (BPM locations; need measurements...) (Completed)
• PEPPo magnet/Solenoid installed on 80/20 (Completed)
• Gun work progressing well:
  1. Schneedle replaced
  2. Scheedle, anode, and cathode aligned
  3. Gun rebuild schedule
• Vacuum work / Beam line assembly Fridays starting at 10:30 am for any who want to participate

Next Week:

• Alignment today (Wed.) or Friday of big pieces (solenoid, viewer crosses, FC4)
• Get area up to transition after solenoid under vacuum. Install valve/bellow/bpm.
• Install 4 5/8" BPMs after insertion measurements completed
• Break vacuum in FC3 region

2 weeks:

• Build 80/20 support structure; add mounting plates/brackets/etc. (Pb table components awaiting delivery)
• Pull Heliax from Sprectrum analyzer/Control room >> Buncher
• Unistrut mounting for cables / gas bottle rack - Neal will do when available
• 4th terminal system in Control room under assembly/rebuild
• Ready to install Al base plates for FC3 region rework as well as solenoid stand. FC3 plate awaiting machining.
• Items from To-do list...

Engineering

• Insertion measurements in progress on 4 5/8" BPMs

Other business

Reports on Open Action Items:

Action Items:

• Formal run plan (McCaughan)

Back to Main Meeting Minutes Page