CIS OnCall and Troubleshooting

From Ciswikidb
Revision as of 13:42, 18 March 2015 by Grames (talk | contribs)
Jump to navigation Jump to search

Beam Noise

Use FastSEE BPM Mode to diagnose intensity and position from injector BPM's
  1. To start : Accel Menubar => EDM => BPM => New FastSEE Control
  2. MAC or Channel Access is required
  3. Choose a BPM by selecting corresponding ioc e.g. iocse11
  4. Sampling rate 4 micro-seconds and frequency of sampling is the display rate
BPMSEE mode
Non-invasive
BPM spikes update correctly
Less samples limit to lower frequency
Make sure FastSee Light is ON
FastSEE mode
Invasive
BPM spikes update erratically
More samples for higher frequency ~60kHz
Retrieved from "https://wiki.jlab.org/ciswiki/index.php?title=CIS_OnCall_and_Troubleshooting&oldid=4755"