Difference between revisions of "200kV Prebuncher"

From Ciswikidb
Jump to: navigation, search
(Created page with "What is needed for 200 kV beam... * Reza says we need 4-5x existing (limited by 30W) => 135 W * From Curt 2/24/20 :use new Cu cavity (SS problematic) :buy an amplifier (need...")
 
 
(3 intermediate revisions by one other user not shown)
Line 1: Line 1:
 
What is needed for 200 kV beam...
 
What is needed for 200 kV beam...
  
* Reza says we need 4-5x existing (limited by 30W) => 135 W
+
* Reza says we need 4-5x existing power @ 200 keV (limited by 30W) => 135 W
  
* From Curt 2/24/20
+
* From Curt 2/18/20
 
:use new Cu cavity (SS problematic)
 
:use new Cu cavity (SS problematic)
 
:buy an amplifier (need a spare)
 
:buy an amplifier (need a spare)
 
:active temp system (resonance control)
 
:active temp system (resonance control)
 +
 +
* From Haipeng slides pertaining to the 1497 MHz "BCM-style" cavity to be installed in the Prebuncher location as part of the Injector Upgrade (aka UITF Buncher) [[media:Sixth_calculation.pdf]]
 +
 +
* From Haipeng slide pertaining to the presently installed 1497 MHz Los Alamos CEBAF Buncher [[media:200309_First_calculation.pptx]]

Latest revision as of 17:17, 20 March 2020

What is needed for 200 kV beam...

  • Reza says we need 4-5x existing power @ 200 keV (limited by 30W) => 135 W
  • From Curt 2/18/20
use new Cu cavity (SS problematic)
buy an amplifier (need a spare)
active temp system (resonance control)
  • From Haipeng slides pertaining to the 1497 MHz "BCM-style" cavity to be installed in the Prebuncher location as part of the Injector Upgrade (aka UITF Buncher) media:Sixth_calculation.pdf