Difference between revisions of "200kV Wien Filter"

@@ Line 1: / Line 1: @@
-J. Benesch, "Modeling the SLAC/JLab Wien filter" [[media:JLab-TN-15-032.pdf]]
-== Coil Modified for 20Amp operation ==
-: Replace 2 layer X 14 turn/layer #16 round wire w/ 2 layer X 13 turn/layer #13 square wire
-: Maintain 5.00" ID chamber clearance
-== Magnet Steel Modifications ==
-: Coil fits within existing transverse gap (chamber to steel), but not within existing vertical gap (conflicts electrode ports)
-: Channels are cut into upper and lower steel yokes to allow coils to separate further (remove conflicts w/ electrode ports)
-: COIL RETAINER PLATES (32893-C-0008) flipped hold coil 0.124" further from mid plane (0.312 - 0.188 inches)
-== Vacuum Chamber Modifications ==
-: Larger coil width conflicts with magnet mount lugs
-: MAGNET MOUNT LUG (32893-C-0024) width reduced from 1.45 to 0.95 inches welded to vacuum chamber body reduced and moved
-== Electrode modified for 20kV operation ==

Latest revision as of 14:06, 27 August 2020