Difference between revisions of "AIPINJ Layouts"

From Ciswikidb
Jump to: navigation, search
Line 5: Line 5:
  
 
==Gun Layouts==
 
==Gun Layouts==
 +
* January 15, 2020 [[media:200115_gun2chopper.pdf]]
 
* July 17, 2019 [[media:gunthroughchopperjuly17.pdf]]
 
* July 17, 2019 [[media:gunthroughchopperjuly17.pdf]]
 
* June 13, 2019 [[media:190613_guntochopper.pdf]]
 
* June 13, 2019 [[media:190613_guntochopper.pdf]]

Revision as of 21:05, 15 January 2020

Overall Layouts

Note: At the November 12, 2019 Modeling meeting [1], we decided to move the buncher to the midpoint position (between the centerline of the choppers and the centerline of the 2-cell in the booster). The buncher position in the July 2019 layout drawings is not the midpoint position; the buncher is shifted closer to the choppers in the July 2019 layout drawings.

Gun Layouts

Chopper Layouts

Booster Layouts

Note: At the November 12, 2019 Modeling meeting [2], we decided to move the buncher to the midpoint position (between the centerline of the choppers and the centerline of the 2-cell in the booster). The buncher position in the July 2019 layout drawings is not the midpoint position; the buncher is shifted closer to the choppers in the July 2019 layout drawings.

-QCM was .32" further downstream. so all those interfaces moved.
-distance between chopper cavities was 59.32", so distance from center of choppers to downstream face of chopper #2 increased from 29.65" to 29.66".
-buncher, IFY0I06, MB00I06, A3, YAO cavity, A4 all moved slightly downstream.
-YAO cavity was .37" longer than the design drawing.

Warm-RF Drawings

SRF Drawings