Beam Setup and Measurement - May 2018

From Ciswikidb
Revision as of 10:24, 9 May 2018 by Grames (talk | contribs) (Created page with "== Energy Setup and Measurement == == Emittance Measurement == :Setup beam to FC2 :Use qsUtility configuration files to scan MQJ0L02 and/or MQJ0L02A and uses harp IHA0L03 :B...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Energy Setup and Measurement

Emittance Measurement

Setup beam to FC2
Use qsUtility configuration files to scan MQJ0L02 and/or MQJ0L02A and uses harp IHA0L03
Be sure to enter the correct momentum in the configuration and/or analysis files
Elegant optics lattice begins at MQJ0L02 (that is, use or propagate optics to that location)

Energy Spread Measurement

Setup beam to 2D spectrometer dump
Upstream quads MQJ0L02 and MQJ0L02A can be any value but must be recorded
Use HarpFitterTool to scan IHA2D00 to measure horizontal beam size

Optics Setup

Chris Tennant's Elegant Model from September 2015 installed for reference /usr/opsdata/bubble/elegant/Sep2015
Retrieved from "https://wiki.jlab.org/ciswiki/index.php?title=Beam_Setup_and_Measurement_-_May_2018&oldid=14473"