Difference between revisions of "CIS OnCall and Troubleshooting"

Revision as of 14:42, 18 March 2015

Use FastSEE BPM Mode to diagnose intensity and position from injector BPM's

BPMSEE mode

Non-invasive
BPM spikes update correctly
Less samples limit to lower frequency
Make sure FastSee Light is ON

FastSEE mode

Invasive
BPM spikes update erratically
More samples for higher frequency ~60kHz

@@ Line 1: / Line 1: @@
 == Beam Noise ==
-: FastSEE BPM Mode
+: Use FastSEE BPM Mode to diagnose intensity and position from injector BPM's
 # To start : Accel Menubar => EDM => BPM => New FastSEE Control
+# MAC or Channel Access is required
 # Choose a BPM by selecting corresponding ioc e.g. iocse11
-# Parameters
+# Sampling rate 4 micro-seconds and frequency of sampling is the display rate
-* Sampling is 4 micro-seconds
+:: BPMSEE mode
-* Frequency of sampling is determined by Display Update Rate
+ Non-invasive
-* BPMSEE mode - non-invasive, sampling rate is slower but BPM spikes update correctly; make sure FastSee Light is ON
+ BPM spikes update correctly
-* FastSEE mode - invasive, sampling is faster and BPM spikes may update erratically
+ Less samples limit to lower frequency
+ Make sure FastSee Light is ON
+:: FastSEE mode
+ Invasive
+ BPM spikes update erratically
+ More samples for higher frequency ~60kHz