View source for CIS Phase 1 work plans

=== Week 1 (Sep 21 - Sep 27) High Voltage Testing w/ PSS lock-ups ===
<div class="mw-collapsible mw-collapsed">
* Updated schedule [[media:200914_AIPINJ_Weeks_Sep_18_update.docx]]
* High voltage test slides [[media:200902_HV_Plans.pptx]]
* Gun and Wien tasks [[Media:High Voltage Work Gun2 & Wien filters.xlsx]]
</div>

=== Week 2 (Sep 28 - Oct 4) - Instrument, Magnet, LCW, Air, Laser disconnects ===
<div class="mw-collapsible mw-collapsed">
; Fri 9/25 - Mon 9/28
* CIS Gun Jobs
: Wien electrode testing – 9am!!!
: Gun HVPS lockout - DONE
: Gun HV cable disconnect – DONE
: Remove PIG – Coordinate w/ Neil for convenient time
: Shukui - Laser outrigger table as-founds, remove components
: Scott - Remove yellow box
: Scott - Disconnect Decarad

; Monday 9/28 Tasks (updated 0915 9/28)
* Power down Wein system (Scott/Joe)
* Power down and remove DecaRad system (Scott)
* Return gun valve config to "normal" (Marcy)
* Dispose of grey mineral oil tank in coordination w/ESH&Q (Carlos/Bubba)
* PSS Kickers and associated chassis removal (SSG)
* Laser table disassembly (Shukui/Scott)

; Tuesday 9/29 Tasks (updated 0930 9/29)
* (Done) Disconnect BPMs 2I01->0I02A (Pete) beginning 5a 
* (Done) Disconnect aperture and cup signal cables (Pete) 5a
* Disconnect rad probes (Melvin) 8a
* Tunnel magnet disconnects (Diggs, Delk) 10a
* (Done) Removal of old chopper amps from rack (Farrish)
* Harp upgrade to PC104 (Dela Cruz)
* ODH Head Replacements (SSG)
* Document existing Wein cabling and power off PS (Scott)

; Wednesday 9/30 Tasks (updated 0900 9/30)
* RF Prebuncher disconnects (Farrish) 6a
* Vacuum Component Labeling (Greenfield, Gonzales) 430a
* Magnet disconnects -- wire wrap-ups, junction box investigation (Coleman, Diggs, Delk) 10a
* Tiny magnet removals (Scott, Grames) 9a
* PSS Kicker Magnet removal (SSG) 9a
* Sample hold cables install, InjSB (Francis) 
* Remaining PSS Interface chassis removal (SSG)
* Harp upgrade to PC104 (Dela Cruz)
* Moser transfers CCOC phone @1430, to reach moving forward x5089 

; Thursday 10/1 Tasks (updated 0830 10/1)
* Picoammeter Removal, InjSB (Francis) 5a
* Sample hold cables install, IN02B24 (Francis)
* BPM Work in IN02B2* (Francis)
* Chopper amplifier upgrade (Farrish)
* Harp upgrade to PC104 (Dela Cruz)
* Viewer+harp hardware disconnects (Norris, Dela Cruz) 6a
* Disconnecting water and air lines from apertures and cups (Adderley) 8a
* Mech Install Pre-Job Walk-Thru (Grames, Wilson) 9a

; Friday 10/2 Tasks (updated 0900 10/2)
* Viewer disconnects (Norris) 6a
* BPM Work in IN02B2* (Francis)
* Chopper amplifier upgrade (Farrish)
* Harp upgrade to PC104 (Dela Cruz)
* PSS Kicker Cables tie-up (SSG)
* Survey and Alignment control measure around gun (S&A)
* Load suitcase with "bad" pucks (CIS)
* Pump-down vacuum in front of tee for next week (CIS) 

; <u>'''Tunnel Work'''</u>

{| class="wikitable"
|-
! Time !! Mon 9/28 !! Tue 9/29 !! Wed 9/30 !! Thu 10/1 !! F 10/2 
|-
| 4a - 8a ||   || I&C; 5a: Francis: BPMs, Cups, Apertures || I&C; 430a: Greenfield + Gonzales: vacuum labelling; 6a: Farrish: Prebuncher || I&C; 6a: Norris: Viewer; 6a: Dela Cruz, Harps || I&C: Norris: Viewer disconnects
|-
| 8a - 10a || CIS + SSG || RadCon: rad probes || SSG: Kicker magnet removal; CIS: Tiny magnet removals || CIS; Adderley: Aperture+Cups Air/Water; Grames: Mech Install Walk-Thru || S&A: Gun
|-
| 10a - 12p || CIS + SSG || DC Power || DC Power: Wire wrap-ups, junction box investigation  ||   || S&A: Gun; SSG: Kicker cable tie-up
|-
| 12p - 2p || CIS + SSG || DC Power || DC Power: Wire wrap-ups, junction box investigation || DC Power || S&A: Gun
|-
| 2p - 4p || CIS + SSG || DC Power || 3p: Moser: Safety Warden checks  ||   || S&A: Gun
|-
| 4p - ?? ||  ||  ||  ||  ||
|}

; <u>'''Other Work Occurring When Convenient'''</u>
* Remove suitcase, Tunnel (CIS)
* Harp upgrade, InjSB (I&C)
* ODH Head Replacement, InjSB and Tunnel (SSG)
* PSS Chassis Removals, InjSB (SSG)

</div>

=== Week 3 (Oct 5 - Oct 11) - Vacuum disconnects, girder/pedestal removal, injector survey network ===
<div class="mw-collapsible mw-collapsed">
; Monday Oct 5 
* vacuum tests, disconnects, and pre-removal blank offs (CIS)
* QCM->downstream Survey and Alignment
* S&H cable work for iocinse4, InjSB (Francis)

; Tuesday Oct 6
* Survey and Alignment finishing up around 0L04 (S&A)
* U-tube operations at 0L03 (Cryo)
* S&H cable work for iocinse4, InjSB (Francis)
* Stage/prepare for craning our girders (Mech Install)
* Chopper SSA upgrade -- LCW line install, InjSB (Mech Install / RF)

; Wednesday Oct 7
* S&H cable work for iocinse4, InjSB (Francis)
* Chopper SSA upgrade, InjSB (Farrish)
* Wein PS Work, InjSB (Windham)
* VIP UHV PS Work, InjSB (Windham)
* Harp PC104 upgrade, InjSB (Dela Cruz)

; Thursday Oct 8
* BPM work, InjSB (Francis)
* Chopper SSA upgrade, InjSB (Farrish)
* Harp PC104 upgrade, InjSB (Dela Cruz)

; Wednesday Oct 7 and Thursday Oct 8 -- Mechanical Install
* Remove to test lab --
** Laser outrigger table 
** <strike>1st Wein girder and pedestals
** 2nd Wein girder, apertures, and pedestals
** Photocathode puck suitcase on cart</strike>
* Remove to Brett Lewis grey oil tank 
* Penetration stone drops 

Current list of Injector penetrations to be dropped: '''57, 86, 108, possibly [[Unknown Pene for Choppers | this one]]'''

Penetration drop distance [https://logbooks.jlab.org/entry/3854100 e3854100]:
* 34ft from floor of InjSB to floor of Inj tunnel
* 25ft from floor of InjSB to elevated Inj tunnel cable tray

; Friday Oct 9
* BPM Work, InjSB (Francis)
* Chopper SSA upgrade, InjSB (Farrish)
* Harp PC104 upgrade, InjSB (Dela Cruz)
* Penetration stone drop -- 57, 86, 108, Tunnel (Mech Install)
** Penetration above laser hut already opened

</div>

=== Week 4 (Oct 12 - Oct 18) Cable Pulls and Y-Chamber Girder Rebuild ===
<div class="mw-collapsible mw-collapsed">
* Laser/Y-Chamber viewer for Y-chamber girder (Marcy)
* Fiducializing Y-chamber girder (S&A)
* Laser window under vacuum evaluations (Phil/Shukui/Caryn)
* Documenting early InjSB racks (Scott)
* Cable pulls through penetrations (EES) 
* <strike> Fire pipe demolition? </strike> (Facilities Contractor)
* Wein upgrade (Carlos) --
** Finish new Wien electrodes drawing and sign-offs
** Vacuum chambers to machine shop for mods
** Begin creating new screens
* [[Tunnel Photos Oct14 2020|Injector Tunnel Photos]] from W 10/14


; Monday Oct 12
Tunnel -- 
* Hooking up VIPs to new 18V PS for load testing (Marcy/Scott)
* Cable pulls through penetrations (EES)

InjSB --
* BPM Cable Pulls through Penetration 86 (Francis)
* Chopper SSA upgrade (Farrish)
* Harp to PC104 upgrade (Dela Cruz)
* Early rack documentation and space optimization (Scott)
* PSS Upgrade work (IN02BNI, B29, B30) (SSG)


; Tuesday Oct 13
Tunnel --
* Cable pulls through penetrations (EES)
* Resistor box evaluation (Coleman)

InjSB --
* BPM Work, IN02B{*} (Francis)
* Chopper SSA upgrade, back of IN01B{03-11} (Farrish)
* Harp to PC104 upgrade, IN03B07  (Dela Cruz)
* Early rack documentation and space optimization, IN01B{02-05} (Scott)
* PSS Upgrade, IN02{BNI, B29, B30} (SSG)


; Wednesday Oct 14
Tunnel --
* Cable pulls through penetrations (EES)
* Safety warden walk-through (Moser)

InjSB --
* BPM Work, IN02B{*} (Francis)
* Chopper SSA upgrade, back of IN01B{03-11} (Farrish)
* Harp to PC104 upgrade, IN03B07  (Dela Cruz)
* Early rack documentation and space optimization, IN01B{02-05} (Scott)
* PSS Upgrade, IN02{BNI, B29, B30} (SSG)
* Determining rack location for Wien magnet PSs, IN02-middle (Coleman, Grames, Moser)  
* Safety warden walk-through (Moser)
* Conduit in penetration 135 (Electricians)


; Thursday Oct 15
Tunnel --
* S&A Level surveys

InjSB --
* BPM Work, IN0{2,3}B{*} (Francis)
* Chopper SSA upgrade, back of IN01B{03-11} (Farrish)
* Harp to PC104 upgrade, IN03B07  (Dela Cruz)
* Early rack documentation and space optimization, IN01B{02-05} (Scott)
* PSS Upgrade, IN02{BNI, B29, B30} (SSG)
* 20A PS Install, Rack re-org, IN02B22 (DC Power)

; Friday Oct 16
Tunnel --
* Cable pulls through penetrations (EES)
* Mott cable removals (Scott/Riad, EES)

InjSB --
* Chopper SSA upgrade, back of IN01B{03-11} (Farrish)
* Harp to PC104 upgrade, IN03B07  (Dela Cruz)
* Early rack documentation and space optimization, IN01B{02-05} (Scott)
* PSS Upgrade, IN02{BNI, B29, B30} (SSG)
* 20A PS Install, Rack re-org, IN02B22 (DC Power)
* IN02B26 Power Lock-Out, ~915a (DC Power)

</div>

=== Week 5 (Oct 19 - Oct 23)  Prep for Gun to Y Vacuum Installation ===
<div class="mw-collapsible mw-collapsed">
;Non-Tunnel Work
* Build new Y-chamber viewer =>  '''Y-built w/test screen, Laser being built.''' 
* Use test screen + laser + S&A to verify position of first viewer => '''This week'''
* Install + align + vacuum seal (2) viewers => '''target this week'''
* Caryn will confirm but identified best ‘mushroom’ window, attach => '''done'''
* ME provide ALL points to S&A for installation (gun table, 2I stand, Y-chamber, 2 peds for Wien, 2 peds A1/A2) => '''???'''
* Carlos' Wien-mania!

;Tunnel Work
* Complete remove old keV Mott cables => '''done'''
* Complete remove old gun HV cables => '''done'''
* Jim pulls Wien PS cables? => '''done'''
* Does Wien HV cable pull start? => '''starting this week'''
* Scott will finish tie back of cables on tunnel floor to cable tray => '''done'''
* Refill 86? => '''no, not yet'''

; Standing Injector Service Building Work  
* BPM Work, IN0{2,3}B{*} (Francis)
* Chopper SSA upgrade, back of IN01B{03-11} (Farrish)
* Harp to PC104 upgrade, IN03B07  (Dela Cruz)
* Early rack documentation and space optimization, IN01B{02-05} (Scott)
* PSS Upgrade, IN02{BNI, B29, B30} (SSG)
* 20A PS Install, Rack re-org, IN02B22 (DC Power)

; Monday Oct 19
Tunnel -- 
* Cryo u-tube pulls for 0L0{2,3,4} 

; Tuesday Oct 20
Tunnel --
* Cable pulls and removals

InjSB --
* BPM Work, IN0{2,3}B{*} (Francis)
* Chopper SSA upgrade, back of IN01B{03-11} (Farrish)
* Harp to PC104 upgrade, IN03B07  (Dela Cruz)
* Early rack documentation and space optimization, IN01B{02-05} (Scott)
* PSS Upgrade, IN02{BNI, B29, B30} (SSG)
* 20A PS Install, IN02B22, 2p - 4p (DC Power)

; Wednesday Oct 21
Tunnel -- 
* S&A Verify line with new control

InjSB --
* PSS Upgrade, IN02B{NI, 29, 30} 9a - 4p (SSG - single person)
* Viewer work, IN03B07, 6a - 9a (Norris)
* Wien controls work, IN01B03, 6a - 9a (Dela Cruz)
* M56 Hardware Removal from IN02B22, (I&C)


; Thursday Oct 22
InjSB --
* Wien Magnet PS Install, IN02B22, afternoon (DC Power)
* Early rack documentation and space optimization, IN01B{00-05}, 9a - 4p (Windham)
* PSS Upgrade, IN02B{NI, 29, 30} 9a - 4p (SSG - single person)
* Viewer work, IN03B07, 6a - 9a (Norris)
* Wien controls work, IN01B03, 6a - 9a (Dela Cruz)


; Friday Oct 23
Tunnel -- 
* Vacuum work clean room craned in 6a - 8a (Mech Install)
* Clean room setup and prepping (Marcy)
* Gun interlock checks in preparation of removal of old HV Interlock Chassis in IN01B02 (Windham, Grames)
* Laser room work (Shukui)

InjSB --
* Early rack documentation and space optimization, IN01B{00-05}, 9a - 4p (Windham)
* PSS Upgrade, IN02B{NI, 29, 30} 9a - 4p (Beizer)
* Viewer work, IN03B07, 6a - 9a (Norris)
* Wien controls work, IN01B03, 6a - 9a (Dela Cruz)
* 20A PS Install, IN02B22 (DC Power)


<u>'''Inj Service Building Work'''</u>

[[File:InjSB Racks.png|1000px]]

{| class="wikitable"
|-
! Time !! Wed 10/21 !! Thu 10/22 !! Fri 10/23 
|-
| 5a - 9a || Dela Cruz, Norris, <strike>Francis</strike> || Dela Cruz, Norris, <strike>Francis</strike> || Dela Cruz, Norris, <strike>Francis</strike> 
|-
| 9a - 12p || <strike>Francis</strike>, SSG, <strike>Windham</strike> || <strike>Francis</strike>, SSG || <strike>Francis,</strike> SSG, Windham 
|-
| 12p - 4p || DC Power, SSG, <strike>Windham, Francis</strike> || DC Power, SSG, Windham, <strike>Francis</strike>  || DC Power, SSG, Windham, <strike>Francis</strike>
|}

</div>


=== Week 6 (Oct 26 - Oct 30)   Remove old Y+NEG & Move GUn2 new location ===
<div class="mw-collapsible">
;Tunnel work
* Remove NEG filter from HV chamber
* Setup mobile cleanroom over HV chamber '''done'''
* Vent Gun3 chamber to test Gun3 valve
* Vent Gun2 chamber to test Gun2 valve
* Remove 2I NEG beam line, remove NEG pedestal (temporarily)
* Replace 10” flange + SHV connector + blank off + pump down
* Prep Gun3 & Y-chamber for Install to remove
* Wrap up UHV ion pump power supply power tests
* INSTALL lift and move gun table off feet, & move Gun3 & Y-chamber back to TL-1137
* S&A may start setting/checking points (gun feet, 2I ped, Y ped, Wien ped, A1/A2 ped)

;Non-Tunnel Work
* Finish Y-chamber : add viewers, add laser vacuum window, add NEG towers, add gun valve
* Wien-mania! [[200kV Wien filter - FINAL | (high level schedule)]]
::-Wien magnetic field mapping
::-Bubba assembles the fixtures '''done'''


; Tues Oct 27
Tunnel --
* Gun vacuum work, 9a - 3p (CIS)
* Videographer Tour, 3p+ (K. Carter + two videographers) 

InjSB --
* Chopper SSA upgrade, back of IN01B{03-11} (Farrish)
* PSS Upgrade, IN02B{NI, 29, 30} 9a - 4p (Beizer)
* Wien controls work, IN01B03, 6a - 9a (Dela Cruz)
* Viewer work, IN03B07, 6a - 9a (Norris)
* BPM Work, IN0{2,3}B{*} (Francis)
* 20A Wien Magnet PS Install, IN02B22 (Coleman)
* LLRF air temperature control system removal from IN01B13? (Plawski?)


<u>'''Injector Tunnel and Service Building Work'''</u>
{| class="wikitable"
|- style="background-color:#E6E6FA"
! '''Location'''<br>Time !! Mon 10/26 !! Tue 10/27 !! Wed 10/28 !! Thu 10/29 !! Fri 10/30 
|- style="background-color:#F0F8FF" 
| '''InjSB'''<br>5a - 9a || Norris, Dela Cruz, Francis || Norris, Dela Cruz, Francis || Norris, Dela Cruz, Francis || Norris, Dela Cruz, Francis || Norris, Dela Cruz, Francis
|-
| '''Tunnel'''<br>5a - 9a ||   || ''Gun Vacuum Work'' || ''Gun Vacuum Work'' || Norris, Dela Cruz, Francis || Norris, Dela Cruz, Francis
|- style="background-color:#F0F8FF"
| '''InjSB'''<br>9a - 12p || Francis, SSG || Francis, Windham, SSG || Francis, Windham, SSG || Francis, Windham, SSG || Francis, Windham, SSG
|-
| '''Tunnel'''<br>9a - 12p || ''Gun Vacuum Work'' || ''Gun Vacuum Work'' || ''Gun Vacuum Work'' || || 
|- style="background-color:#F0F8FF"
| '''InjSB'''<br>12p - 4p || SSG || Windham, SSG  || Windham, SSG || Windham, SSG || Windham, SSG
|-
| '''Tunnel'''<br>12p - 4p || ''Gun Vacuum Work'' || ''Gun Vacuum Work'' <br> 3p:Videographer Tour || ''Gun Vacuum Work'' || || 
|}

[[File:InjSB Racks.png|1000px]]


; Mon Oct 26
Tunnel --
* Gun vacuum work, 9a - 4p (CIS)

InjSB --
* PSS Upgrade, IN02B{NI, 29, 30} 9a - 4p (Beizer)
* Wien controls work, IN01B03, 6a - 9a (Dela Cruz)
* Viewer work, IN03B07, 6a - 9a (Norris)
* BPM Work, IN0{2,3}B{*} (Francis)
* 20A Wien Magnet PS Install, IN02B22 (Coleman)
* LLRF air temperature control system removal from IN01B13? (Plawski?)

; Tues Oct 27

; Wed Oct 28
Tunnel --
* Gun vacuum work, 9a - 4p (CIS)

InjSB --
* PSS Upgrade, IN02B{NI, 29, 30} 9a - 4p (Beizer)
* Wien controls work, IN01B03, 6a - 9a (Dela Cruz)
* Viewer work, IN03B07, 6a - 9a (Norris)
* BPM Work, IN0{2,3}B{*} (Francis)

; Thur Oct 29
Tunnel --
* 

InjSB --
* PSS Upgrade, IN02B{NI, 29, 30} 9a - 4p (Beizer)
* Wien controls work, IN01B03, 6a - 9a (Dela Cruz)
* Viewer work, IN03B07, 6a - 9a (Norris)
* BPM Work, IN0{2,3}B{*} (Francis)

; Fri Oct 30
Tunnel --
* 

InjSB --
* PSS Upgrade, IN02B{NI, 29, 30} 9a - 4p (Beizer)
* Wien controls work, IN01B03, 6a - 9a (Dela Cruz)
* Viewer work, IN03B07, 6a - 9a (Norris)
* BPM Work, IN0{2,3}B{*} (Francis)

</div>

=== Week 7 (Nov 2 - Oct 6) and beyond...  ===
<div class="mw-collapsible">
Tunnel work
* INSTALL sets new foot pads, new anchor bolts if needed
* INSTALL lift and move gun table to new foot pads
* INSTALL move new y-chamber from TL-1137 to injector, and vice versa
* S&A and CIS install and align Y-chamber + NEG tube + Gun table (CL cathode/anode)
* Pump down and leak check
* Check laser align/retro : back fill N2 + test retro from GaAs + test alignment to viewer
* Iterate as needed
* End week with laser + Y + Gun + NEG aligned (pre-bake)
* Prep for new suitcase (i.e. prep work to safe photocathodes during eventual gun bake)

</div>

=== Penetration Work ===
<div class="mw-collapsible">
'''InjSB Penetrations that are open''' (click for pictures): 
'''[[PenetrationALH|above laser hut]], [[Penetration58|58]], [[Penetration86|86]], [[Penetration108|108]], [[Penetration135|135]]'''
* 34ft from floor of InjSB to floor of Inj tunnel
* 25ft from floor of InjSB to elevated Inj tunnel cable tray


'''Penetration Cable Pulls/Removals --'''
* Tony pulling new Wien E-field HV cables
* Norris (possibly) removing old Cat5 cable
* Norris pulling new viewer cables
* <strike> Riad/Scott removing old Mott HV cables </strike>
* <strike> Coleman pulling new Wien B-field magnet cables </strike>
* Cole pulling new neutron detector cables (above 0L03)
* <strike> Scott pulling motor control cables for A1++ </strike>

[[File:InjSB Racks.png | 1000px]]
</div>

=== Fire System Work ===
<div class="mw-collapsible">
Description of Task: Replacement of tunnel sprinkler piping, fire alarm control panels in B85 & B98, replacement of detection devices.

Latest construction [[:File:Firepipe 10 Oct Update.docx|schedule]] has contractor in '''Injector''' between 11/24/20 and 1/4/21.
</div>