Designs
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Drawings and Designs
Gun Designs
- 14" Chamber: ACC-200-3000-0301 Media:HV chamber gun 14" diameter drawing.pdf
- NEG macor insulator: ACC-200-3000-0326
- Cathode electrode two-piece body: ACC-200-3000-0350 Media:Tee electrode manufacturing drawing two piece body.pdf
- Cathode electrode one-piece body: ACC-200-3000-0301 Media:Tee electrode manufacturing drawing one piece body.pdf
- 18" Chamber: media:LeskerPrint.pdf
- Spherical electrode: ACC-200-3000-0440
- 18" chamber JLab dwg: ACC-200-3000-0449
- Front flange: ACC-200-3000-0451
- Spherical electrode shell: ACC-200-3000-0460
- Electrode front end: ACC-200-3000-0461
- "HV Stalk Flange"? Insulator flange?: ACC-200-3000-0465
- Electrode key: ACC-200-3000-0466
- Spherical electrode: Internal mount: ACC-200-3000-0467
- HV Chamber ring holder - connection to insulator?: ACC-200-3000-0468
- Spring holder (puck dock in electrode): ACC-200-3000-0469
- Electrode Back end: ACC-200-3000-0607
- Anode standoff parts
- 3.680" long, 3 holes: 32709-C-0454
- 3.430" long, 3 holes: ACC-200-3000-0213
- 1.170" long, 3 holes: ACC-200-3000-0349
- 1.429" long, 3 holes: ACC-200-3000-0344
- Proud anode: ACC-200-3000-0345
- Bore shield 0.5": ACC-200-3000-0346
- macor spacer: ACC-200-3000-0347
- macor bushing: ACC-200-3000-0348
- steel pipe standoff: ACC-200-3000-0601
Prep chamber
- Bottom flange: ACC-200-3000-0151
- Prep body: ACC-200-3000-0130
- ring anode: ACC-200-3000-0139
- Puck pin: ACC-200-3000-0317
- Suitcase manip end: ACC-200-3000-0170
Gun Table
- Table top: ACC-200-3000-0171
- Gun table assy: ACC-200-3000-0190
Loading Chamber
- Danny's puck dock loading chamber media:3PuckLoad.pdf
Y chamber(s)
- Laser table girder assembly JL0091130-0201
- Y chamber injector: Kurt J Lesker PRD180090-0500
Wien filters
Magnets
- FG magnet top assy: MAG-009-0040-0001
DP cans
- Narrow DP can: VAC-300-0100-0013
harp
- Super harp assy (12GeV harp): DIA-007-0200-3001
- Horizontal assy: DIA-007-0200-3025
- 12 GeV harp fork: DIA-007-0200-3039
- another 12 GeV Harp fork: DIA-007-0200-3028
- Harp flange: DIA-007-0200-3008
- Harp BNC connector weldment: DIA-007-0200-3009
viewers
- Draft Tech note: media:injector_viewer_assembly_2020.pdf
- Older viewer prints
- Air cylinder mods