February 3, 2021 - Weekly ME meeting
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Meeting Info =
Meeting Feb 3, 2021
- Air cylinder mods => done, happy? update dwgs?
- H-Wien => done, happly? S&A Fri/Mon.
- QW => done, happy! Assemblies going to welder, final coils from Mike due Fri
- PSS kicker => very happy! coils due next week, order 2-part design, 4-part ready to go if needed
- Laser box => Status...?
- Prebuncher cavity => Mark's water jacket
- What else? I think we're done...
Meeting January 28, 2021
Here's my Phase 1 punch list, I think we have plans for most/all, anything to add or update...
- Viewer/cylinder mods design completed, submitted to shop, Phil will see Vince today, what else?
- -SUPPORT RODS, SPRING GUIDES, PISTON STOPS WILL BE FINISHED TODAY.
- -TURNBUCKLES – were sent out. Should be completed by next Thursday/Friday. Bob is going to call to see if any chance of getting the date moved up.
- PSS kicker fixture for 2- and 4- part, terminals for Jerry; will parts be here by mid-Feb when coils arrive?
- -Coils are ordered, due mid-February
- -GH will complete a 4-part and 2-part fixture using SS 304 w/ tapped holes as requested
- -JK will work with Gary to lay out a concept for PSS electrical connections to kicker
- -DM says priority should be finish model support, then electrical connections but happens soon
- -LL requested details about diode response time/location, will use when it's available/decided
- -When Gary is ready to discuss updated model, I'll call another brief meeting.
- QW shim pieces Lakshmi requested, need late-Feb.
- -DM submitted shop drawing today, JG signe
- QW Assembly plan worked out
- Helping Carlos resolve large H-Wien electrode gap, probably not a big prob, agree path forward
- Installation info S&A will need to align girders, do they have this?
- Injector firepipe install wrapped up, I will schedule a time next week to meet w/ Shukui about new laser box, need in ~month
- What are remaining drawings to update?
- What else?
Meeting January 21, 2021
- Air cylinder plan
- Danny - items to check on
- bellows length, confer w/ SG => need 1.5" travel, has 1.7" stroke, seems okay
- air cylinder exhaust adjustment/tool => hex key to adjust
- Shaun - items to design/fab
- Longer rods (i.e. we will not modify hex shaft length) => Shaun completed layout, Danny will verify dwg, submit shop (10)
- 7/16 to 3/8 turnbuckle (i.e. we will not modify hex threads), we prefer/want split but can start/try unsplit+lock nut => have (3) 7/16 to 3/8 split, need (7)...Danny/Phil will look over print, fabricate (>7-10)
- Piston stops => probably have enough, Shaun will order 10
- Spring centering cylinder => submit order to shop for 10
- Update drawings => add to list of dwgs to update for documentation
- Phil - prep work
- Test mock-up, be satisfied plan is sound => satisfied
- Prepare for modifying cylinders when new parts are ready => YES!!!!
- PSS kicker plan
- Coils are ordered, due mid-February
- GH will complete a 4-part and 2-part fixture using SS 304 w/ tapped holes as requested
- JK will work with Gary to lay out a concept for PSS electrical connections to kicker
- DM says priority should be finish model support, then electrical connections but happens soon
- LL requested details about diode response time/location, will use when it's available/decided
- When Gary is ready to discuss updated model, I'll call another brief meeting.
- Lakshmi's update
- media:210121_LakshmiUpdate.jpeg
