View source for GTS meeting 1 14 19

= '''List of beamline hardware modifications''' =
# Replace YAG screen on Viewer 1 - '''''Done'''''
# Replace Slit on Viewer 2 with holes assembly - '''''Done'''''
# Replace two ion collectors with new ones
# Replace Harp fork (Tony)
# Remove modified DP can - '''''Done'''''
# Remove Faraday Cup - '''''Done'''''
# Remove bellow upstream of dump - '''''Done'''''
# Remove LDR Harp arm and replace with ion-pump
# Install TE011 Cavity
# Install Deflecting Cavity - '''''Done'''''
# Install new 5th solenoid
# Move DP can 1 to end of beamline - '''''Done'''''
# All bellows at least 2.5 inch diameter - '''''Done'''''
# Both gate valves are 2.5 inch-bore and will remain on beamline - '''''Done'''''


= '''List of hardware support''' =
# Install Deflecting Cavity power supply, MO and other parts
# Install TE011 Cavity readout cable and electronics


= ''' List of software and controls changes''' =
# Re-program SCAM to allow for 1 Hz and 50 ns macro-pulses
# Add 5th solenoid to magnet screen


= ''' Remove gain-switched laser from GTS to Lab 6''' =


= ''' Install Brock's Magnetometer Cavity''' =


= ''' Modification to HV and Preparation chambers''' =
# Upgrade anode HV bias feed-through to 5 kV
# Remove anode and clean melted spot
# Fix Transverse Manipulator
# Fix Sb boat
# Clean Sb pellets off chamber


= ''' Install BNL high bunch laser''' =