GTS meeting 2 16 16
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
- Update: Carlos will meet with J. Coleman and O. Garza to discuss beamline I&C on Feb-17-2016. Media:GTS Beamline component list.xlsx
- Design Update – Puck and Gun Magnet: media:Design_Update-Puck-GunMagnet.pdf media:Design_Update-Puck-GunMagnet.pptx
- Yan's calculation about solenoid focusing Media:GTS_solenoid_current_vs_focal_length.pptx
- Update: Beamline has been aligned, but we are checking with C. Curtis about the dump vertical position:
- Update: RadiaBeam steering magnets ordered, expected by 02/22/16.
- Update: We are working on the cathode prep chamber, BUT the gate valve separating it form the gun seems to leak through.
- Bubba made barrel polishing work!!!
- Upon receiving electrode form machine shop, he had to use a file to remove deep markins
- Then he used 320 grit sand paper
- And finally, used 70% barrel full with corncob, and let the ball bounce for ~20 hours.
- By polishing a small section with diamond paste (1 micron) he concluded that the finish is equivalent to that he obtains with DPP.
- Next, polish shed! Bubba has a recipe from Mass Finishing for using first plastic cones in the tumbler, instead of the 320 grit sand paper...curious minds await