Difference between revisions of "GTS meeting 3 19 21"
Jump to navigation
Jump to search
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
* Upgrade Glassman Gun PSS interlock chassis (Scott) | * Upgrade Glassman Gun PSS interlock chassis (Scott) | ||
* Add vacuum interlock to HV supply (Scott) | * Add vacuum interlock to HV supply (Scott) | ||
| − | + | ||
| − | |||
* Beamline - no bake of beamline: (Mamun and Bubba) | * Beamline - no bake of beamline: (Mamun and Bubba) | ||
** Replace YAG screens on Viewers 1, 2 and 3 | ** Replace YAG screens on Viewers 1, 2 and 3 | ||
** Replace leaky right-angle valve | ** Replace leaky right-angle valve | ||
| − | |||
** Remove Deflecting Cavity and move TE_011 Cavity in its place | ** Remove Deflecting Cavity and move TE_011 Cavity in its place | ||
| Line 28: | Line 26: | ||
** Replace Anode | ** Replace Anode | ||
** Replace Pierce geometry | ** Replace Pierce geometry | ||
| − | ** Upgrade anode HV bias feed-through to | + | ** Upgrade anode HV bias feed-through to 10 kV |
Latest revision as of 14:32, 12 April 2021
- Upgrade Glassman Gun PSS interlock chassis (Scott)
- Add vacuum interlock to HV supply (Scott)
- Beamline - no bake of beamline: (Mamun and Bubba)
- Replace YAG screens on Viewers 1, 2 and 3
- Replace leaky right-angle valve
- Remove Deflecting Cavity and move TE_011 Cavity in its place
- Prep Chamber: (Mamun)- Completed [1]
- Fix Transverse Manipulator
- Fix Sb boat
- Clean Sb pellets off chamber
- Clean/check Bottom Heater
- Add Cs for Robust Photocathode research
- Clean/replace windows
- Add pucks with Moly and GaAs (Robust Photocathode) substrates
Add Oxygen Remove Cs/K source Add K source
- Gun HV Chamber: (Carlos)
- Replace Anode
- Replace Pierce geometry
- Upgrade anode HV bias feed-through to 10 kV
- Laser: (Shukui)
- Re-install 500 MHz green fiber laser
- Install new pulse laser