GTS meeting 5 13 19

From Ciswikidb
Revision as of 13:24, 11 June 2019 by Suleiman (talk | contribs)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
  1. S. A. K. Wijethunga et al., “Simulation Study of the Emittance Measurements in Magnetized Electron Beam”, presented at the 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, paper MOPRB110: media:moprb110.pdf
  2. S. Zhang et al., “High Current High Charge Magnetized and Bunched Electron Beam from a DC Photogun for JLEIC Cooler”, presented at the 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, paper TUPTS105: media:tupts105.pdf
  3. M. S. Stefani et al., “Magnetized Gridded Thermionic Electron Source”, presented at the 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, paper TUPTS093: media:tupts093.pdf


  • NAPAC 2019 [2]:
    • Abstract submission deadline: 15 May 2019


  • ATLis Tasks:
  1. Remove GTS Photogun and its Preparation Chamber to be ready to install Thermionic Gun [3]
  2. Install New Spellman HV Supply at GTS (150 kV, 67 mA) [4]
  3. Update SCAM firmware - lower frequencies (0.5 Hz) and shorter pulses (50 ns) for Free Run Mode [5]


  • TOSP:
  1. Operation of Thermionic Gun Hot Deck