Difference between revisions of "GTS meeting 7 29 19"

Latest revision as of 09:45, 29 July 2019

7/30 work plan:
- set up camera to visually monitor HV (waiting on updated software)
- Standard HV processing
- HV processing with solenoid on if standard HVP goes well

7/31 work plan:
- Finish RF work, Final check of SCAM and create supply to voltage chart
- Check DC Bias Supply progress (possibly reinstall)

@@ Line 2: / Line 2: @@
 :: [[media:DT_F1933.pdf]]
 :: Drawing: [[media:TGun_Cathode_drawing.pdf]]
+* Overview:
+** HV Processing needs to be done
+** Survey and alignment was completed. Final placement of solenoid needs to be set
+** SMA cable causing RF issue has been replaced and final RF work needs to be done
+** DC Bias Supply is in John Musson's Lab being modified and tested: working schedule unknown
+** open valve to beam-line and produce initial beam
+** determine cut-off voltages with solenoid on/off
+** produce RF bunched beam of specific bunch charges
+** measure bunch properties of magnetized and non-magnetized beam
+** produce 65 mA magnetized beam as part of Xelera deliverables
+* 7/29 work plan:
+** complete gun enclosure for corona mitigating nitrogen flow
+** Install radiation monitors
+** modify Hot deck HV contact
+** finalize Solenoid placement
+** connect the anode bias
+* 7/30 work plan:
+** set up camera to visually monitor HV (waiting on updated software)
+** Standard HV processing
+** HV processing with solenoid on if standard HVP goes well
+* 7/31 work plan:
+** Finish RF work, Final check of SCAM and create supply to voltage chart
+** Check DC Bias Supply progress (possibly reinstall)
+* 8/1-onward work plan:
+** Depends on what happens up to this date...