GTS meeting 7 29 19

• Survey:

media:DT_F1933.pdf

Drawing: media:TGun_Cathode_drawing.pdf

• Overview:
  • HV Processing needs to be done
  • Survey and alignment was completed. Final placement of solenoid needs to be set
  • SMA cable causing RF issue has been replaced and final RF work needs to be done
  • DC Bias Supply is in John Musson's Lab being modified and tested: working schedule unknown
  • open valve to beam-line and produce initial beam
  • determine cut-off voltages with solenoid on/off
  • produce RF bunched beam of specific bunch charges
  • measure bunch properties of magnetized and non-magnetized beam
  • produce 65 mA magnetized beam as part of Xelera deliverables

• 7/29 work plan:
  • complete gun enclosure for corona mitigating nitrogen flow
  • Install radiation monitors
  • modify Hot deck HV contact
  • finalize Solenoid placement
  • connect the anode bias

• 7/30 work plan:
  • set up camera to visually monitor HV (waiting on updated software)
  • Standard HV processing
  • HV processing with solenoid on if standard HVP goes well

• 7/31 work plan:
  • Finish RF work, Final check of SCAM and create supply to voltage chart
  • Check DC Bias Supply progress (possibly reinstall)

• 8/1-onward work plan:
  • Depends on what happens up to this date...