View source for January 23, 2020 - Mechanical engineering

From last week...

==ME updates==
* Shaun has developed a design to fixture and align the beam line solenoids => updates?
* Phil is tallying available BPM's types (tunnel + labs) => ?
* Marcy is checking on metallized YAG screen w/ hole => ?
* Joe is coordinating test of laser window size 2-3/4" vs. 4-1/2" => Danny updated layout, will pass along to modelers
* Shaun/Joe are working to get laser room and outrigger table into CAD model
: => In /group/inj_group/hansknect/ => D:\My Documents from jlab work pc\AutoCad\cleanroom designs\OuterlaserBox
: => Joe put photos on OneDrive, has dwg info for Shaun
* Joe gave Chase info for magnet names => ...waiting
* Modelers...
: => Reza and Alicia are on the hook to provide a sequence next tuesday's 1/28 meeting
: => Dennis is ready to put any layout into elegant to test optics, then we iterate 
* A1/A2 => Reza is wondering about PSS kicker to A1, and A2 being remotely insertable (like A3 or A4)
* Chopping chamber => fc#1 bellow is leaky, will need to replace this summer (if not sooner), so beam line will be vented...
* Advanced Booster work => Neil is looking at plan to remove 5D beam line and construct support plates for 4500 lb QCM or Booster

==Quick links==
* [https://jeffersonlab-my.sharepoint.com/:f:/g/personal/grames_jlab_org/EhXqNtq16CBNt4JzMmy4T1ABNsJ15YGBFTQkkMenD_ommQ Link to AIPINJ OneDrive folder]

* [[AIPINJ Layouts]]