June 16, 2017 - 200kV gun upgrade meeting
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Summer 2017 SAD Update
200kV Gun
- Task and Timeline Gantt chart => media:170421_CHG.pdf
NEG Tube
- We are making 4 BPM's
- ...Shop has materials now and machining (#327755)
- ...then Phil will pick up for weld, 400C bake, leak check, clean, NEG coat
- ...then Pete will perform optical/electrical checks
- ...then John will perform Gabou map
- We are making 1 solenoid NEG tube
- ...MMF prep and magnet new MFH to +/- 2.5A
- ...then Phil will vacuum fire 4.5" NR + 2.5" pipe
- ...then shop will weld flanges w/solenoid on tube
- ...then Phil will clean/leak check
- ...then Phil will NEG coat
- Final NEG tube design => media:NEGTUBE_MAY03.pdf
- M20 Old Assembly Modification media:0990.pdf
- M20 New Assembly Can media:0991.pdf
- M20 New Assembly 6.00 x 4.500 reducer flangemedia:0.992.pdf
- Assembly of compound NEG tube
- Attach BPM #1 to Solenoid tube (axially symmetric)
- Rotate BPM #2 to align to BPM #1 and attach to Solenoid tube
- Now, the BPM #1 + Solenoid + BPM #2 is one piece
- Install compound NEG tube by aligning BPM #1/BPM #2 upright, use upstream ROT to Gun2 bellows flange and
Diagnostics Chamber Installation
- Second bake and activate week of May 30th => Remove and replace Gun3 ATLIS task
- Remove VBV3I02 from special interlock and swap PLC for relays