Difference between revisions of "March 31, 2017 - 200kV gun upgrade meeting"
Jump to navigation
Jump to search
| Line 28: | Line 28: | ||
* Planning for May | * Planning for May | ||
| − | === Eliminating Gun Switch | + | === Eliminating Gun Switch Software === |
| − | |||
===Spellman HVPS update=== | ===Spellman HVPS update=== | ||
Revision as of 12:28, 30 March 2017
New action items
Electrode/insulator design/fabrication
- Gabriel assessed fields to vacuum chamber, modified shed radius
- S&A insulator measurements
- ME design for shop ... goal was end of March !!!
- Then ... vacuum fire electrode 900C, barrel polish, assemble to insulator
- Status of parts
Vacuum chamber/considerations
- Retain leak valve, add right angle valve through first bake, at least
- Retain electrical isolation and NEG activation at 100C
- Pick up ceramics, blow out NEG
Gun2 NEG Tube
- BPM discussion w/ Musson occurred on Monday, considerations:
- Antenna : stripline or wire (mini or weld)
- Position and orientation of antenna v. can for transmission line, length of antenna v. energy
- NEG coat surfaces of pipe, not can? TBD
- Re-use Gun3 NEG solenoid
- Met in tunnel to develop first pass ME design Logbook pic/layout of the existing Gun2 NEG
Gun3 Removal
- Matt check with Willeke next week for Gun3
- Marcy submitted ATLIS task for the job
- Remove Gun3 table, rebuild 8" chamber w/ extractor, RGA, GP-100 on 80/20 stand
- Recoup Gun3 MFH solenoid
- Planning for May
Eliminating Gun Switch Software
Spellman HVPS update
- Mike Johnson has been working on Laser Frequency Divider
- Time to get him started on Spellman at UITF?