Difference between revisions of "March 31, 2017 - 200kV gun upgrade meeting"
Jump to navigation
Jump to search
Line 15: | Line 15: | ||
===Gun2 NEG Tube=== | ===Gun2 NEG Tube=== | ||
* BPM discussion w/ Musson occurred on Monday, considerations: | * BPM discussion w/ Musson occurred on Monday, considerations: | ||
− | ** Antenna : stripline or wire (mini or weld) | + | ** Antenna : stripline or wire (mini or weld) [[media:170327_stripline.pdf]] |
** Position and orientation of antenna v. can for transmission line, length of antenna v. energy | ** Position and orientation of antenna v. can for transmission line, length of antenna v. energy | ||
** NEG coat surfaces of pipe, not can? TBD | ** NEG coat surfaces of pipe, not can? TBD |
Revision as of 06:14, 31 March 2017
New action items
Electrode/insulator design/fabrication
- Gabriel assessed fields to vacuum chamber, modified shed radius
- S&A insulator measurements
- ME design for shop ... goal was end of March !!!
- Then ... vacuum fire electrode 900C, barrel polish, assemble to insulator
- Status of parts
Vacuum chamber/considerations
- Retain leak valve, add right angle valve through first bake, at least
- Retain electrical isolation and NEG activation at 100C
- Pick up ceramics, blow out NEG
Gun2 NEG Tube
- BPM discussion w/ Musson occurred on Monday, considerations:
- Antenna : stripline or wire (mini or weld) media:170327_stripline.pdf
- Position and orientation of antenna v. can for transmission line, length of antenna v. energy
- NEG coat surfaces of pipe, not can? TBD
- Re-use Gun3 NEG solenoid
- Met in tunnel to develop first pass ME design Logbook pic/layout of the existing Gun2 NEG
- First iteration media:NEGTUBE_MARCH30.pdf
Gun3 Removal
- Matt check with Willeke next week for Gun3
- Marcy submitted ATLIS task for the job
- Remove Gun3 table, rebuild 8" chamber w/ extractor, RGA, GP-100 on 80/20 stand
- Recoup Gun3 MFH solenoid
- Planning for May
Eliminating Gun Switch Software
Spellman HVPS update
- Mike Johnson has been working on Laser Frequency Divider
- Time to get him started on Spellman at UITF?