Difference between revisions of "May 11, 2018 - SAD Toolbox Meeting"

Revision as of 19:21, 10 May 2018

Bubble Run

Added new harp w/ temporary controls

Added ceramic break to radiator (shield aimed downstream), in series w/ FCUP

Added Gumby (10 sec) laser shutter, tested w/ beam and remote enable/disable

Added x-ray card to locate beam position

Upgrade Preparations

Tested HVPS to 300kV in SF6 tanks at 15psi, and greater

Suitcase added to Tee, bake ~48 hours up to 165C, Tee vacuum good <100's nA

DecaRad installation below outrigger laser table started, heads/cables ready to dress

PSS dipole measurements vs. expected gun voltage

Bubble will continue to run until next Friday @ 8am

Met w/ Jerry to review PSS integration plans

@@ Line 1: / Line 1: @@
 ===Past Week===
-:Bubble experiment
+:Bubble Run
-::Added new harp w/ temporary controls, HCO OK
+::Added new harp w/ temporary controls
-::Restored radiator isolation w/ ceramic (shield aimed downstream), in series w/ FCUP, HCO OK
+::Added ceramic break to radiator (shield aimed downstream), in series w/ FCUP
-::Added Gumby (10 sec) laser shutter, tested w/ Beam OK, can now enable/disable from control room
+::Added Gumby (10 sec) laser shutter, tested w/ beam and remote enable/disable
-::Restored x-ray card to set beam position at radiator
+::Added x-ray card to locate beam position
-::Background looking OK ~0.01 Hz
 :Upgrade Preparations
+::Tested HVPS to 300kV in SF6 tanks at 15psi, and greater
 ::Suitcase added to Tee, bake ~48 hours up to 165C, Tee vacuum good <100's nA
-::DecaRad unit installed below outrigger laser table, heads/cables ready, ready soon
+::DecaRad installation below outrigger laser table started, heads/cables ready to dress
+::PSS dipole measurements vs. expected gun voltage
 ===Next Week and Beyond===
+:Bubble will continue to run until next Friday @ 8am
+:Met w/ Jerry to review PSS integration plans