Difference between revisions of "NEG coated 2.5 inch OD BPM's"

Revision as of 17:28, 14 June 2021

200 KV BPM's with NEG coating

@@ Line 1: / Line 1: @@
-New BPM's were developed for the 200 kV gun NEG tube beam line.
+KV BPM's with NEG coating
-Please see Region 1 released drawings for prints.
+== ME Design ==
+* can weldment [[media:JL0091130-0114 BPM TUBE WELDMENT, REV-.pdf]]
+* final assembly drawing coming from danny
-;Performance Notes
+== Assembly Sequence ==
-* BPM #1
+# Receive can/feedthroughs
-* BPM #2
+# Clean
-* BPM #3
+# Degas
-* BPM #4
+# NEG Coat
+# Check feedthroughs
+# Assemble feedthroughs
+# Serialize
+# Leak check cans
+# Electrical measurement
+# Report K's and center
-;Design and draft notes
+== Electrical Measurements (K's, center, and linearity plots) ==
-*weldment [[media:JL0091130-0114 BPM TUBE WELDMENT, REV-.pdf]]
-;Assembly sequence
+* Summary (see NEG BPM 1-4) - [[media:UITF_SPM_Summary_9_21.ods]]
-* Receive can/feedthroughs
+* NEG BPM #1 - [[media:NEG_1_fixed.jpg]] [[media:NEG_1_fixed_log.jpg]] [[media:NEG_1_1cmx2cm_lower.pdf]]
-* Clean
+* NEG BPM #2 - [[media:NEG_2_diff_sum.jpg]] [[media:NEG_2_log.jpg]] [[media:NEG_2_1cmx2cm_upper.pdf]], [[media:NEG_2_1cmx2cm_boresight.pdf]]
-* Degas
+* NEG BPM #3 - [[media:NEG_3_diff_sum.jpg]] [[media:NEG_3_log.jpg]]
-* NEG Coat
+* NEG BPM #4- [[media:NEG_4.jpg]] [[media:NEG_4_log.jpg]]
-* Check feedthroughs
-* Assemble feedthroughs
-* serialize
-* Leak check cans
-* electrical measurement
-* report K's and center