View source for NEG coated 2.5 inch OD BPM's

200 KV BPM's with NEG coating

== ME Design ==
* can weldment [[media:JL0091130-0114 BPM TUBE WELDMENT, REV-.pdf]]
* final assembly drawing coming from danny

== Assembly Sequence ==
# Receive can/feedthroughs
# Clean
# Degas
# NEG Coat
# Check feedthroughs
# Assemble feedthroughs
# Serialize
# Leak check cans
# Electrical measurement
# Report K's and center

== Electrical Measurements (K's, center, and linearity plots) ==

* Summary (see NEG BPM 1-4) - [[media:UITF_SPM_Summary_9_21.ods]]
* NEG BPM #1 - [[media:NEG_1_fixed.jpg]] [[media:NEG_1_fixed_log.jpg]] [[media:NEG_1_1cmx2cm_lower.pdf]]
* NEG BPM #2 - [[media:NEG_2_1cmx2cm_upper.pdf]], [[media:NEG_2_1cmx2cm_boresight.pdf]]
* NEG BPM #3
* NEG BPM #4- [[media:NEG_4.jpg]] [[media:NEG_4_log.jpg]]