Oct 4, 2021 - Tune Mode Generator
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Monday 10/4 @ 9am.
We'll be in TL-2236 and/or join by bluejeans: https://bluejeans.com/7572697097
- Scott's TMG history : media:211004 - Quick TMG History.docx
- Scott's update macropulse chassis page : https://wiki.jlab.org/ciswiki/index.php/SCAM_macropulse_controller_used_at_CEBAF_GTS_and_UITF
- John's TMG schematics page : https://wiki.jlab.org/ciswiki/index.php/Tune_Mode_generators
- John's system components directory : media:211004_JohnComponents.xlsx
Follow-up from meeting today
- John's thoughts : media:211004_TMG thoughts.docx
- Add tee on C macropulse TTL output to high-impedance input network scope to MCC for Ops => to log image when problem occurs
- Patch power meter head by spare cable to ISB scope => to observe fast transitions of laser power when problem occurs?
- Compare wiring of Hall C RTP HV cable, are polarity leads reversed or different than others => to look for ground issue
- Observe fast 20ns fast transition and hold ~100 msec when going from CW to beam sync => to test HV driver
- Leave C in CW for extended period of time, than test TM/VL modes and the fast 20ns transition => test if a HV driver chip heating issue
- Setup TMG taken from tunnel w/ same experience, test output into 1000:1 divider
- Swamp SCAM module in the ISB => change in behavior, also monitor macropulse output
- Swap RTP cell => use spare or UITF cell => tests if we have an intermittent issue with RTP cell, maybe happens when RTP is OFF (i.e. CW) extended period