Spring SAD 2019
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
- Remove Mott dump dipole
-
- ATLIS http://opsweb.acc.jlab.org/CSUEApps/atlis/task/18993
- MMF magnet assessment (4/11/19) media:5MeVMOTT_4_9_2019.xlsx
- Test Vertical Wien filter for PREX spin flip
-
- ATLIS http://opsweb.acc.jlab.org/CSUEApps/atlis/task/19027
- Solenoid Flip https://logbooks.jlab.org/entry/3676903
- VWien Flip https://logbooks.jlab.org/entry/3679227
- Measure PQB vs optical pulse shape
- Measure chopper focal length vs. radial position
- Measure Hall B laser circular polarization
-
- ATLIS http://opsweb.acc.jlab.org/CSUEApps/atlis/task/19093
- Summary of measurements - https://logbooks.jlab.org/entry/3679345
- Add HVPS burst disk, charge 60psi, set trip-points
- Create new PV that is average of SF6 for alarm handler
- PREX source setup (hel board, laser table, photocathode )
-
- ATLIS http://devweb.acc.jlab.org/CSUEApps/atlis/task/19090
- Adjusted Hall C laser spot size for lens - https://logbooks.jlab.org/entry/3680624
- Gun2 photocathode exchange
-
- ATLIS http://opsweb.acc.jlab.org/CSUEApps/atlis/task/19071
- SSL DBR 75105-2 wafer mounted on puck 36 - https://logbooks.jlab.org/entry/3677005
- Heat & activate Gun2 photocathode
- Install new anode bias supply controls ISB
-
- ATLIS - http://devweb.acc.jlab.org/CSUEApps/atlis/task/19108
- HV Calibration John made used at GTS, see fig. 2 https://logbooks.jlab.org/entry/3668182
- Reconfigure Hall D laser with PM pre-amp in ISB for testing
- Bias Gun2 anode
- Install helicity quad for testing
-
- Joe is working on this one...
- Injector as-found survey for upgrade
- Store Bubble Chamber photon dump
- Injector/Laser Room Chiller Maintenance