Spring SAD 2019
Jump to navigation
Jump to search
- Remove Mott dump dipole
-
- ATLIS http://opsweb.acc.jlab.org/CSUEApps/atlis/task/18993
- MMF magnet assessment (4/11/19) media:5MeVMOTT_4_9_2019.xlsx
- Test Vertical Wien filter for PREX spin flip
-
- ATLIS http://opsweb.acc.jlab.org/CSUEApps/atlis/task/19027
- Solenoid Flip https://logbooks.jlab.org/entry/3676903
- VWien Flip https://logbooks.jlab.org/entry/3679227
- Measure PQB vs optical pulse shape
- Measure chopper focal length vs. radial position
- Measure Hall B laser circular polarization
-
- ATLIS http://opsweb.acc.jlab.org/CSUEApps/atlis/task/19093
- Summary of measurements - https://logbooks.jlab.org/entry/3679345
- Add HVPS burst disk, charge 60psi, set trip-points
- Create new PV that is average of SF6 for alarm handler
- PREX source setup (hel board, laser table, photocathode )
-
- ATLIS http://devweb.acc.jlab.org/CSUEApps/atlis/task/19090
- Adjusted Hall C laser spot size for lens - https://logbooks.jlab.org/entry/3680624
- Gun2 photocathode exchange
-
- ATLIS http://opsweb.acc.jlab.org/CSUEApps/atlis/task/19071
- SSL DBR 75105-2 wafer mounted on puck 36 - https://logbooks.jlab.org/entry/3677005
- Heat & activate Gun2 photocathode
- Install new anode bias supply controls ISB
-
- ATLIS - http://devweb.acc.jlab.org/CSUEApps/atlis/task/19108
- HV Calibration John made used at GTS, see fig. 2 https://logbooks.jlab.org/entry/3668182
- Reconfigure Hall D laser with PM pre-amp in ISB for testing
- Bias Gun2 anode
- Install helicity quad for testing
-
- Joe is working on this one...
- Injector as-found survey for upgrade
- Store Bubble Chamber photon dump
- Injector/Laser Room Chiller Maintenance