UITF Meeting - January 29, 2018

---

200keV Beam to both UITF dumps!

---

UITF Schedule - Zimbra calendar resource now functional. Add uitf-schedule to your zimbra calendar to see cae lock-up dates/times, etc.

---

UPDATES

• Choppers are being conditioned by Mark and Larry. Thanks!
  • When do you estimate to complete conditioning for 200 keV beam (75 Watts RF power on choppers).

• Magnets:
  • Address PS rack ITF03 which prevents using four magnets presently
  • Need to add one more corrector pair between the gun and the solenoid
  • EPICS magnet screen is complete and functional with field maps provided by Joe
  • Insulate and strain relieve the two FD chopper solenoids (they're off now, M. Beck is working on it)

• Valves
  • When will the two MDC valves have status read back?

• FSD
  • Performed software functionality test in UITF control room last week.
  • What else is needed for full functionality?

• BPMs
  • Cables installed and terminated.
  • Status on hardware, firmware, and EPICS software?
  • We need them operational and reading in EPICS before running beam in Tune Mode

• CRYO
  • From last meeting: Cool down transfer line and 1/4 cryo-module to 80 K.
  • Estimated time to complete?
  • Update: D. Bullard completed installation of guard vacuum relief vent outside the cave
  • UPDATES: cryogenic connections?

• RF
  • Update on RF for Quarter Cryo Module?
  • Estimate time to complete?
  • UPDATES: Klystron connections?

Epics screens Working with T. Larrieu and team on SAVE/RESTORE.

Matt is working on OSP for buncher and choppers

By February 5, 2018:

All cryo work complete All High Power RF work complete OSP for QCM approved ODH assessment, vent can on relief stack, penetrations filled, etc,