View source for UITF Meeting - pre-run0 to do list

UITF pre-run0 commissioning steps:

Hot checkout with beam and admin steps associated with commissioning plan
#Finish sending 200 keV beam to both waist height dumps, identify all the components that don’t work and get them fixed
#Call RadCon and SSG and coordinate shielding and BLM calibration (step 6 of commissioning plan)

Buncher Commissioning 
#Beam to 200 keV spectrometer, find zero crossing and gradient that provide longitudinal waist
#Beam to MeV spectrometer, verify zero crossing, find gradient that provides longitudinal waist
#Based on 1 and 2, scale buncher gradient to set longitudinal waist at 2-cell

Optic studies
#Harp scans, measure spot sizes and compare to Elegant predictions
#Measure beam emittance
#Dipole calibration? We know it’s 200 keV beam
#Measure energy spread

Yao cavity time of flight system
#Work with Rama to see if it works

Brock harmonic cavity
#Measure bunchlength with Brock cavity, use chopper slit to vary the bunchlength?

Chopper commissioning