Difference between revisions of "UITF Procedures not managed via document control"
Jump to navigation
Jump to search
| Line 2: | Line 2: | ||
*krypton and vacuum high voltage processing | *krypton and vacuum high voltage processing | ||
*photogun bakeout | *photogun bakeout | ||
| − | *QE scanning the photocathode | + | *QE scanning the photocathode [[media:how to perform a QE scan.docx]] |
*turn ON/OFF the photogun high voltage | *turn ON/OFF the photogun high voltage | ||
Revision as of 14:46, 25 September 2020
- krypton and vacuum high voltage processing
- photogun bakeout
- QE scanning the photocathode media:how to perform a QE scan.docx
- turn ON/OFF the photogun high voltage
- tune mode generator alignment procedure media:tune mode generator alignment procedure.pdf
- pockel cell alignment procedure
- maximizing the power delivered to the laser hutch inside UITF enclosure
techniques to set the UITF buncher phase and gradient
- using the harmonically resonant cavity
- using the 200 keV spectrometer
- using the Yao cavity, time-of-flight method
- overall description
notes on sweeping the UITF enclosure and making it safe after beam operations
- overview of the sweep procedure for UITF, including pre-sweep steps
- UHV ion pumps, setting the trip limit
- how to get it
- Locking out the gun and high power RF
- Locking out the valve upstream of the booster
- Rowgowski-coil beam position monitor media:Kevin's proposed test plan for evaluating the Rogowski coil bpm.docx