Difference between revisions of "UITF Procedures not managed via document control"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
*photogun bakeout | *photogun bakeout | ||
*QE scanning the photocathode | *QE scanning the photocathode | ||
| + | *turn ON/OFF the photogun high voltage | ||
'''[[laser related]]''' | '''[[laser related]]''' | ||
| Line 9: | Line 10: | ||
*maximizing the power delivered to the laser hutch inside UITF enclosure | *maximizing the power delivered to the laser hutch inside UITF enclosure | ||
| − | '''[[techniques to set the UITF buncher]]''' | + | '''[[techniques to set the UITF buncher phase and gradient]]''' |
| − | *harmonically resonant cavity | + | *using the harmonically resonant cavity |
| − | *200 keV spectrometer | + | *using the 200 keV spectrometer |
| − | *Yao cavity, time-of-flight method | + | *using the Yao cavity, time-of-flight method |
| − | '''[[notes on sweeping the UITF enclosure and making it safe after beam | + | '''[[UITF chopper system]]''' |
| + | *overall description | ||
| + | |||
| + | '''[[notes on sweeping the UITF enclosure and making it safe after beam operations]]''' | ||
| + | *overview of the sweep procedure for UITF, including pre-sweep steps | ||
'''[[machine protection at UITF]]''' | '''[[machine protection at UITF]]''' | ||
| − | *UHV ion pumps, setting trip limit | + | *UHV ion pumps, setting the trip limit |
'''[[Beam Authorization]]''' | '''[[Beam Authorization]]''' | ||
Revision as of 14:15, 4 March 2020
- krypton and vacuum high voltage processing
- photogun bakeout
- QE scanning the photocathode
- turn ON/OFF the photogun high voltage
- tune mode generator alignment procedure
- pockel cell alignment procedure
- maximizing the power delivered to the laser hutch inside UITF enclosure
techniques to set the UITF buncher phase and gradient
- using the harmonically resonant cavity
- using the 200 keV spectrometer
- using the Yao cavity, time-of-flight method
- overall description
notes on sweeping the UITF enclosure and making it safe after beam operations
- overview of the sweep procedure for UITF, including pre-sweep steps
- UHV ion pumps, setting the trip limit
- how to get it
- Locking out the gun and high power RF
- Locking out the valve upstream of the booster
- Rowgowski-coil beam position monitor