Alicia Saringer work items

--Pressure Systems Part 9 review and comments to K. Dixon
--Flexitallic Flange torque requirements

--Develop Milestone/schedule -Done

--EV development 

-Someone to cut Kinney Sight glass.  -Done

--FlowSafe Dwgs per selected based on calculation. -Done

--Sightglass for the RV on compressors -Done

--KelF ring for EV245RT/DWG Dimensions.  -Done

--CTF Dewar and Main Compressor Relief Valves. 

--Looking into reducing/mitigating cavitation in the Kinney Pump system to try and bring down the suction line pressure. 

-Working on changing the next three relief valves, RV2450, RV243SU and RV243RT.  

--Addressing EV245RT Leak. Currently working on repair.  -Done  

--Add documents to docushare and recreate PS-7 for C9 Header 

--Sight Glass Assembly Installation at Kinney Pump - Received needs to be cut. 

--Kinney Water Line Leak-Will be addressed during relocation. By-pass line leakage

--CTF Recovery Compressor C4 and C6 P&I 

--Install the C.V. on C9

--Relief Valve Instrumentation/Protected Zones (CTF Complete)

--Id. all RV Category on spreadsheet completed. Proceed to inspect then in accordance with the IC and get all ASME relief valves in the plant.

--Id relief valves on CHL2 

--Liquid Level Indicator determined to go on the coalescer. Develop a drawing and plan.
Waiting for the drawings to be completed. The John C Ernst soft parts are on order.  

--CHL Recovery Compressor Header Redesign

--Develop CTF Document - Ongoing

--CTF Spreadsheets - Ongoing - Get with Bill about full startup after power outage

--CTF Warm-Up/Cool Down (Complete-Review Thilan's plan)-Complete

 --Recovery Compressor LOTO Review (Complete)-Second Review Complete

--Dunham-Bush Check Valve Hinge Installation Verification (Complete)

--Recovery Compressor Pipe Analysis (Complete)
--LCLS II Spreader Analysis (Complete), Start White Paper (Complete), Comment Adjudication (Complete), Incorporate Comments and Develop Final Draft(Complete)-Revise to incorporate different lifting mechanisms --(Complete)