Alicia Saringer work items

 --Addressing EV245RT Leak. Currently working on identifying exact repair kit information. Ordered kit and developed a repair plan. Plan developed and under review. Waiting for Recovery Compressor to be on to perform the task with Frank.  

--Add documents to docushare and recreate PS-7 for C9 Header

--Sight Glass Assembly Installation at Kinney Pump - Received needs to be cut. 

--Kinney Water Line Leak-Will be addressed during relocation. By-pass line leakage

--CTF Recovery Compressor C4 and C6 P&I 

--Install the C.V. on C9

--Relief Valve Instrumentation/Protected Zones (CTF Complete)

-Working on changing the next three relief valves, RV2450, RV243SU and RV243RT.

--Id. all RV Category on spreadsheet completed. Proceed to inspect then in accordance with the IC and get all ASME relief valves in the plant.

--Id relief valves on CHL2 

--Liquid Level Indicator determined to go on the coalescer. Develop a drawing and plan.
Waiting for the drawings to be completed. The John C Ernst soft parts are on order.  

--CHL Recovery Compressor Header Redesign

--Develop CTF Document - Ongoing

--CTF Spreadsheets - Ongoing - Get with Bill about full startup after power outage

--CTF Warm-Up/Cool Down (Complete-Review Thilan's plan)-Complete

 --Recovery Compressor LOTO Review (Complete)-Second Review Complete

--Dunham-Bush Check Valve Hinge Installation Verification (Complete)

--Recovery Compressor Pipe Analysis (Complete)
--LCLS II Spreader Analysis (Complete), Start White Paper (Complete), Comment Adjudication (Complete), Incorporate Comments and Develop Final Draft(Complete)-Revise to incorporate different lifting mechanisms --(Complete)