List of documentation files for the NPS sweeper:

1. Sweeper-dimensions.pdf - top view, dimensions as required for NPS experiments.

2. 67508-00002 S1 R- SWEEPER ASSY.pdf - magnet assembly view.

3. 67508-00003 S1-2 R-A COIL ASSY-NPS SWEEPER MAGNET.pdf - main coil production drawings.

4. 67508-00004 S1-11 R-B YOKE ASSY-NPS SWEEPER MAGNET - yoke production drawings. 

5. 67508-00005 S1-2 R-A CORRECTOR COIL ASSY-NPS SWEEPER MAGNET.pdf - corrector coils.

6. SAM_corr_coil_specifications.pdf - specification for the corrector coils.

7. SAM_main_coil_specifications.pdf - specification for the main coil.

8. SAM_yoke_specifications.pdf - specification for the yoke.

9. SAM-Mc.opc - TOSCA source file.

10. SAM-Mc.table - TOSCA field results. Grid X -1cm, Y -3cm, Z -3cm. With Z=0 at 157 cm downstream of target, X=0 at small angle side of the magnet gap as shown in figure SAM_coordinates.png

11. Main_coil_concept.jpg - concept of the main coil winding.

12. SAM_model_coordinates.png - top view of the TOSCA model (along Y).

13. SAM-6.3deg.png - top view for beam line

13. Preparation-plan.txt - draft of the magnet preparation plan.

14. Field_beam_6.3deg.png - field on the beam line for 6.3 degree NPS position.

15. Field_gap_6.3deg.png - field in the main gap for 6.3 degree NPS position.