Difference between revisions of "Meeting 26 February 2021"

From Cuawiki
Jump to navigation Jump to search
(Created page with "'''DISCUSSION ITEMS''' * Updates on simulation, models, design * [https://wiki.jlab.org/cuawiki/images/8/8c/Tcs_trigger_feb12_21.pdf TCS trigger update] * Hall D plans for...")
 
 
Line 8: Line 8:
  
 
* Other
 
* Other
 +
 +
 +
PARTICIPANTS: A. Comer, A. Asaturyan, B. Wojtsekhowski, R. Ent, H. Mkrtchyan, M. Boer, S. Lassiter, V. Tadevosyan, T. Horn, G. Niculescu
 +
 +
 +
'''SIMULATIONS AND DESIGN - POWER DEPOSITION IN COPPER''' (Bogdan, Gabriel, Steven)
 +
 +
* Calculated fluxes in FLUKA
 +
::* two versions of FLUKA now
 +
 +
* FEA models set up: allows for investigating different cuts (here, vertical) to investigate stress/strain on copper sections
 +
 +
* Initial finding: material gets hot, but stress/strain may not be too large overall
 +
 +
* '''Action:''' continue to determine the impact of thermal swelling on deformation of copper beam pipe for long-term operation in beam
 +
 +
 +
'''TCS UPDATES: TRIGGER''' (Vardan)
 +
 +
* Accidental rate is high (14 MHz) - need to reduce to <100kHz for fADC
 +
 +
* Accidental rate can be reduced to 2.4 MHz by adding a threshold cut on the summed e-+e+ energy deposition
 +
 +
* '''Action:''' Investigate possible ways to further reduce background
 +
::* clustering instead of full quadrant
 +
 +
 +
'''NEXT MEETING: FRIDAY 12 MARCH AT 8:00AM ET'''

Latest revision as of 16:31, 28 February 2021

DISCUSSION ITEMS

  • Updates on simulation, models, design
  • Hall D plans for 2021
  • Other


PARTICIPANTS: A. Comer, A. Asaturyan, B. Wojtsekhowski, R. Ent, H. Mkrtchyan, M. Boer, S. Lassiter, V. Tadevosyan, T. Horn, G. Niculescu


SIMULATIONS AND DESIGN - POWER DEPOSITION IN COPPER (Bogdan, Gabriel, Steven)

  • Calculated fluxes in FLUKA
  • two versions of FLUKA now
  • FEA models set up: allows for investigating different cuts (here, vertical) to investigate stress/strain on copper sections
  • Initial finding: material gets hot, but stress/strain may not be too large overall
  • Action: continue to determine the impact of thermal swelling on deformation of copper beam pipe for long-term operation in beam


TCS UPDATES: TRIGGER (Vardan)

  • Accidental rate is high (14 MHz) - need to reduce to <100kHz for fADC
  • Accidental rate can be reduced to 2.4 MHz by adding a threshold cut on the summed e-+e+ energy deposition
  • Action: Investigate possible ways to further reduce background
  • clustering instead of full quadrant


NEXT MEETING: FRIDAY 12 MARCH AT 8:00AM ET

Retrieved from "https://wiki.jlab.org/cuawiki/index.php?title=Meeting_26_February_2021&oldid=3619"