Difference between revisions of "SciGlass prototype 2022"
(139 intermediate revisions by 4 users not shown) | |||
Line 1: | Line 1: | ||
+ | [[Image:sciglassLY-setup.jpeg|thumb|right]] | ||
+ | |||
[https://wiki.jlab.org/cuawiki/index.php/EEEMCal_Beam_Tests#Work_done <-- Back to Beam Tests Main Page] | [https://wiki.jlab.org/cuawiki/index.php/EEEMCal_Beam_Tests#Work_done <-- Back to Beam Tests Main Page] | ||
==People== | ==People== | ||
* CUA: Tanja Horn (superviser), Yeranuhi Ghandilyan, Joshua Crafts, VSL Team | * CUA: Tanja Horn (superviser), Yeranuhi Ghandilyan, Joshua Crafts, VSL Team | ||
− | * JLab: Vladimir Berdnikov | + | * INFN: Marco Battaglieri, Marco Spreafico, Mariangela Bondi, Giacomo Ottonello, Stefano Grazzi, |
− | * AANL: | + | * JLab: Sasha Somov, Vladimir Berdnikov |
− | + | * AANL: Hamlet Mkrtchyan, Vardan Tadevosyan, Arthur Mkrtchyan | |
==Meetings== | ==Meetings== | ||
+ | '''NEXT MEETING''' | ||
+ | |||
+ | '''[[Wednesday 01.15.2023 11:00am EST]]''' | ||
+ | |||
+ | ''Update on the 5x5 prototype assembly and checklist for the upcoming beam test at JLAB'' | ||
+ | |||
+ | '''zoom info:''' [https://urldefense.proofpoint.com/v2/url?u=https-3A__jlab-2Dorg.zoomgov.com_j_1603176325-3Fpwd-3DQTNYZU8vZ1BpaDN1ZTFSa1VaWnprdz09&d=DwIFaQ&c=CJqEzB1piLOyyvZjb8YUQw&r=AX1P8R1V2r7WiE668wm4tw&m=kJdbOdizyV91bDfVMN9wDJDanVuSKdQu8kl_CxQNDcQkoEO0_s6Qk21DGLNF6Awq&s=hIbZBslZbkSynpC5kI_eFWWRWRowTxZ6_3QepRBZGjk&e=] | ||
+ | Meeting ID: 160 317 6325 | ||
+ | Passcode: 450782)'' | ||
+ | |||
+ | '''Meeting notes''' [] | ||
+ | |||
+ | ---- | ||
+ | '''[[Wednesday 01.08.2023 11:00am EST]]''' | ||
+ | |||
+ | ''Update on the 5x5 prototype assembly and checklist for the upcoming beam test at JLAB'' | ||
+ | |||
+ | '''zoom info:''' [https://urldefense.proofpoint.com/v2/url?u=https-3A__jlab-2Dorg.zoomgov.com_j_1603176325-3Fpwd-3DQTNYZU8vZ1BpaDN1ZTFSa1VaWnprdz09&d=DwIFaQ&c=CJqEzB1piLOyyvZjb8YUQw&r=AX1P8R1V2r7WiE668wm4tw&m=kJdbOdizyV91bDfVMN9wDJDanVuSKdQu8kl_CxQNDcQkoEO0_s6Qk21DGLNF6Awq&s=hIbZBslZbkSynpC5kI_eFWWRWRowTxZ6_3QepRBZGjk&e=] | ||
+ | Meeting ID: 160 317 6325 | ||
+ | Passcode: 450782)'' | ||
+ | |||
+ | '''Meeting notes''' [] | ||
+ | |||
+ | '''Stefano: [https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/where_we_are.pdf (Where we are)]''' | ||
+ | |||
+ | ---- | ||
+ | '''[[Wednesday 01.02.2023 11:00am EST]]''' | ||
+ | |||
+ | ''Update on the 5x5 prototype assembly and checklist for the upcoming beam test at JLAB'' | ||
+ | |||
+ | '''zoom info:''' [https://urldefense.proofpoint.com/v2/url?u=https-3A__jlab-2Dorg.zoomgov.com_j_1603176325-3Fpwd-3DQTNYZU8vZ1BpaDN1ZTFSa1VaWnprdz09&d=DwIFaQ&c=CJqEzB1piLOyyvZjb8YUQw&r=AX1P8R1V2r7WiE668wm4tw&m=kJdbOdizyV91bDfVMN9wDJDanVuSKdQu8kl_CxQNDcQkoEO0_s6Qk21DGLNF6Awq&s=hIbZBslZbkSynpC5kI_eFWWRWRowTxZ6_3QepRBZGjk&e=] | ||
+ | Meeting ID: 160 317 6325 | ||
+ | Passcode: 450782)'' | ||
+ | |||
+ | '''Meeting notes''' [https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/notes_01.03.2023.pdf] | ||
+ | |||
+ | ---- | ||
+ | '''[[Monday 20.02.2023 11:00am EST]]''' | ||
+ | |||
+ | ''Update on the 5x5 prototype assembly and checklist for the upcoming beam test at JLAB'' | ||
+ | |||
+ | '''zoom info:''' [https://urldefense.proofpoint.com/v2/url?u=https-3A__jlab-2Dorg.zoomgov.com_j_1604067208-3Fpwd-3DQ1pQUC8zaCtYSS9Od2RIWVBBcjdKQT09&d=DwIBaQ&c=CJqEzB1piLOyyvZjb8YUQw&r=AX1P8R1V2r7WiE668wm4tw&m=e3i_yodjGVSAsUxTO9lSSCn14d9gjeQtMH9ZTG_0Q5oNb2plSDAri9Srf-8m0Abl&s=WH_7HnhK2H2VcMgjT2HaXWormgvdUtXFoUTSTUwvVXw&e=] | ||
+ | Meeting ID: 160 406 7208 | ||
+ | Passcode: 448495)'' | ||
+ | |||
+ | '''Meeting notes''' [https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/notes_Feb_20_meeting.pdf] | ||
+ | |||
+ | ---- | ||
+ | '''[[Monday 13.02.2023 11:00am EST]]''' | ||
+ | |||
+ | ''Update on the 5x5 prototype assembly and checklist for the upcoming beam test at JLAB'' | ||
+ | |||
+ | '''zoom info:''' [https://urldefense.proofpoint.com/v2/url?u=https-3A__jlab-2Dorg.zoomgov.com_j_1604067208-3Fpwd-3DQ1pQUC8zaCtYSS9Od2RIWVBBcjdKQT09&d=DwIBaQ&c=CJqEzB1piLOyyvZjb8YUQw&r=AX1P8R1V2r7WiE668wm4tw&m=e3i_yodjGVSAsUxTO9lSSCn14d9gjeQtMH9ZTG_0Q5oNb2plSDAri9Srf-8m0Abl&s=WH_7HnhK2H2VcMgjT2HaXWormgvdUtXFoUTSTUwvVXw&e=] | ||
+ | Meeting ID: 160 406 7208 | ||
+ | Passcode: 448495)'' | ||
+ | |||
+ | '''Meeting notes''' [https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/notes_feb_13_meeting.pdf] | ||
+ | |||
+ | ---- | ||
+ | '''NEXT MEETING''': THURSDAY FEBRUARY 2 AT 1:00PM ET '''(postponed on MONDAY, February 6, 11am)''' | ||
+ | ) | ||
+ | |||
+ | '''zoom info:''' [https://urldefense.proofpoint.com/v2/url?u=https-3A__jlab-2Dorg.zoomgov.com_j_1604067208-3Fpwd-3DQ1pQUC8zaCtYSS9Od2RIWVBBcjdKQT09&d=DwIBaQ&c=CJqEzB1piLOyyvZjb8YUQw&r=AX1P8R1V2r7WiE668wm4tw&m=e3i_yodjGVSAsUxTO9lSSCn14d9gjeQtMH9ZTG_0Q5oNb2plSDAri9Srf-8m0Abl&s=WH_7HnhK2H2VcMgjT2HaXWormgvdUtXFoUTSTUwvVXw&e=] | ||
+ | Meeting ID: 160 406 7208 | ||
+ | Passcode: 448495)'' | ||
+ | |||
+ | '''Meeting notes''' [https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/CUA_INFN_meeting_feb-06.pdf] | ||
+ | |||
+ | ---- | ||
+ | '''[[Tuesday 24.01.2023 11:00am EST]]''' | ||
+ | |||
+ | ''Update on the 5x5 prototype assembly and checklist for the upcoming beam test at JLAB'' | ||
+ | |||
+ | '''zoom info:''' [https://urldefense.proofpoint.com/v2/url?u=https-3A__jlab-2Dorg.zoomgov.com_j_1604067208-3Fpwd-3DQ1pQUC8zaCtYSS9Od2RIWVBBcjdKQT09&d=DwIBaQ&c=CJqEzB1piLOyyvZjb8YUQw&r=AX1P8R1V2r7WiE668wm4tw&m=e3i_yodjGVSAsUxTO9lSSCn14d9gjeQtMH9ZTG_0Q5oNb2plSDAri9Srf-8m0Abl&s=WH_7HnhK2H2VcMgjT2HaXWormgvdUtXFoUTSTUwvVXw&e=] | ||
+ | Meeting ID: 160 406 7208 | ||
+ | Passcode: 448495)'' | ||
+ | |||
+ | '''Meeting notes''' [https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/meeting-notes-jan_24.pdf] | ||
+ | |||
+ | ---- | ||
+ | '''[[Tuesday, 17.01.2023 11:00 am EDT (14:00 Rome)]]''' | ||
+ | |||
+ | ''Update on the 5x5 prototype assembly and checklist for the upcoming beam test at JLAB'' | ||
+ | |||
+ | '''zoom info:''' [https://urldefense.proofpoint.com/v2/url?u=https-3A__jlab-2Dorg.zoomgov.com_j_1604067208-3Fpwd-3DQ1pQUC8zaCtYSS9Od2RIWVBBcjdKQT09&d=DwIBaQ&c=CJqEzB1piLOyyvZjb8YUQw&r=AX1P8R1V2r7WiE668wm4tw&m=e3i_yodjGVSAsUxTO9lSSCn14d9gjeQtMH9ZTG_0Q5oNb2plSDAri9Srf-8m0Abl&s=WH_7HnhK2H2VcMgjT2HaXWormgvdUtXFoUTSTUwvVXw&e=] | ||
+ | Meeting ID: 160 406 7208 | ||
+ | Passcode: 448495)'' | ||
+ | |||
+ | '''Meeting notes''' [https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/jan-17-2023-CUA-INFN-JLAB-AANL.pdf] | ||
+ | ---- | ||
+ | '''[[Thursday 03.11.2022 at 12:30 EST]]''' | ||
+ | |||
+ | ''2x2cm, 40cm long SiGlass 5x5 array Prototype with SiPM for early 2023'' | ||
+ | '''Location''': JLAB/ CC F226 | ||
+ | |||
+ | '''zoom info''': [https://urldefense.proofpoint.com/v2/url?u=https-3A__jlab2Dorg.zoomgov.com_j_16034795200&d=DwIDaQ&c=CJqEzB1piLOyyvZjb8YUQw&r=AX1P8R1V2r7WiE668wm4tw&m=nxwzg39zP18hvAYyOYgxVABHNQ813P5fhaXe213mvw_DRXmc2J3BLvykrnZTZ0D&s=Ujpcofl81aU91wzuVHA7eFW0ucnQ6X8ufJa0Xwbwqqs&e=] | ||
+ | ---- | ||
+ | '''[[Thursday 03.11.2022, 9:00AM EDT]] (14:00 Rome)''' | ||
+ | |||
+ | ''2x2cm, 20cm long SiGlass 3x3 array Prototype for SRO tests with cosmics'' | ||
+ | |||
+ | '''Location''': JLAB/ CC F226 | ||
+ | |||
+ | '''zoom info''': [https://urldefense.proofpoint.com/v2/url?u=https-3A__jlab2Dorg.zoomgov.com_j_16034795200&d=DwIDaQ&c=CJqEzB1piLOyyvZjb8YUQw&r=AX1P8R1V2r7WiE668wm4tw&m=f8L4iTRDJfn8FXuAtsapHvgjA4COEwRszJjhkcxYhkASjW3QhYXOU4C2E4cyb4in&s=TwePhUBOfgtcUrNhOYm3S9yBCaEqRBZT-DDBslPwvOY&e=] | ||
+ | ''Agenda:'' to touch base and verify the status of the different components (Sergey: hw and deployment in Hall-B, Vardan: ERSAP, Carmelo: Tridas). | ||
+ | ---- | ||
+ | |||
+ | =='''3x3 prototype (20x20x400mm)'''== | ||
+ | ===Hardware === | ||
+ | |||
+ | - LEMO connectors (FFS.00.250.NTCE52) [https://www.digikey.com/en/products/detail/lemo/FFS-00-250-NTCE52/3597392?s=N4IgTCBcDaIGJwMoDoAMrlgKwYHIBUBhAUSwgF0BfIA] | ||
+ | |||
+ | - LEMO bulkhead connectors (PES.00.250.NTME31) [https://www.digikey.com/en/products/detail/lemo/PES-00-250-NTME31/3806969] | ||
+ | |||
+ | - HV connectors (Pasternack SHV connector PE45556) [https://www.pasternack.com/shv-jack-rg174-rg316-rg188-connector-pe45556-p.aspx] | ||
+ | |||
+ | - HV divider circuit boards + sockets | ||
+ | |||
+ | - Cables for dividers | ||
+ | |||
+ | [[''Technical/Additional'']] | ||
+ | |||
+ | - Label Machine [https://www.amazon.com/LABELWORKS-LW-PX300-Industrial-Label-Maker/dp/B08JQMFZ6F/ref=sr_1_29_sspa?crid=3BQBGDXQ8A5TJ&keywords=label+machine&qid=1667313715&qu=eyJxc2MiOiI1Ljg1IiwicXNhIjoiNS40MCIsInFzcCI6IjQuOTQifQ%3D%3D&sprefix=label+machine%2Caps%2C103&sr=8-29-spons&ufe=app_do%3Aamzn1.fos.006c50ae-5d4c-4777-9bc0-4513d670b6bc&psc=1] | ||
+ | |||
+ | - Black RTV silicone [https://www.amazon.com/Permatex-81158-Black-Silicone-Sealant/dp/B000FW2NBM/ref=sr_1_7?keywords=black+rtv+silicone&qid=1667314270&qu=eyJxc2MiOiIzLjU5IiwicXNhIjoiMi45NyIsInFzcCI6IjIuNzUifQ%3D%3D&sprefix=Black+RTV+silic%2Caps%2C92&sr=8-7] | ||
+ | |||
+ | - Black tape (0.68") [https://www.amazon.com/Wapodeai-Electrical-Temperature-Resistance-Waterproof/dp/B07ZWC2VLX/ref=sr_1_3_mod_primary_new?crid=3OYTWXT7MLYA5&keywords=black+tape+2.00%22%2C+101.60+mm&qid=1667313468&qu=eyJxc2MiOiIxLjU3IiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ%3D%3D&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sprefix=black+tape+2.00+%2C+101.60+mm%2Caps%2C103&sr=8-3] | ||
+ | |||
+ | - Filament to print the box for 5x5 (PLA, 1.75mm) [https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amazon.com_Polymaker-2DPolyLite-2DPrinter-2DFilament-2DPrinting_dp_B07PHTMZQT_ref-3Dsr-5F1-5F16-3Fcrid-3D1C2ROXS10LFTO-26keywords-3Dfilament-2Bblack-2Bpla-2Beconomy-2Bcolor-2Bfabb-2B1.75-2Bmm-2B3kg-26qid-3D1667224863-26qu-3DeyJxc2MiOiItMC4wMSIsInFzYSI6IjAuMDAiLCJxc3AiOiIwLjAwIn0-253D-26sprefix-3Dfilament-2Bblack-2Bpla-2Beconomy-2Bcolor-2Bfabb-2B1.75-2Bmm-2B3kg-252Caps-252C62-26sr-3D8-2D16&d=DwIFaQ&c=CJqEzB1piLOyyvZjb8YUQw&r=AX1P8R1V2r7WiE668wm4tw&m=0aCOb46vMHF1ovfzsOKqrD8Jasu60HNHwqSVkBfRbVvUltEXBl9RYKZcBxkhWBCC&s=B-wtwHSrzaJPxw1q0_FwVTcgr2Kr2zybqLhuZOBQVkE&e=] | ||
+ | |||
+ | [[''Readout for '''SiPM based''' 5x5 SciGlass Prototype'']] | ||
+ | |||
+ | ''Action items'' | ||
+ | |||
+ | • Identify one additional fADC (adds 16 channels) for the beam test – Vladimir | ||
+ | |||
+ | • For “standard” (SiPM and NO SRO) readout need from Fernando additional cables (50ft) – Yeran | ||
+ | |||
+ | ''Available parts:'' | ||
+ | |||
+ | S13360-6025PS – 36 pc | ||
+ | |||
+ | S13360-6075PS – 20pc | ||
+ | |||
+ | S14160-6050HS – 150pc | ||
+ | |||
+ | S14160-6050HS-04 – 16pc | ||
+ | |||
+ | fADC – 1x (16 channels) | ||
+ | |||
+ | HV/signal cables – 10 channels | ||
+ | |||
+ | FEE: 12 preamps from INFN, 4 Bias PCB (16 channels) from INFN | ||
+ | |||
+ | |||
+ | ---- | ||
+ | ===3x3 SciGlass prototype beam test timeline=== | ||
+ | [https://docs.google.com/spreadsheets/d/1CwJVcIRDhr51JtxpQsakKK4meAIScLUfDkQquZgfOyk/edit#gid=0 SciGlass Task List 2022] | ||
+ | |||
+ | ===Detailed List of Activities=== | ||
+ | |||
+ | '''09/16/2022''' - Transmittance measurement ''(Josh, Yeran)'' [https://userweb.jlab.org/~yeran/SciGlass/SciGlass-Transmission.pdf Comparison of 9 blocks produced in summer 2022] | ||
+ | |||
+ | '''09/29/2022''' - Dimensions measurement ''(Josh, Yeran)'' [https://userweb.jlab.org/~yeran/SciGlass/SciGlass_dimentions.pdf] | ||
+ | |||
+ | '''09/29/2022''' - Beam test with 12x1 array in the Hall, ''(Arshak, Vlad)'' | ||
+ | |||
+ | '''10/06/2022''' - 12x1 array removing from the hall ''(Yeran, Arshak)'' | ||
+ | |||
+ | '''10/11/2022''' - 3x3 prototype cosmic test in clean room, ''(Yeran, Arshak)'' | ||
+ | |||
+ | '''10/13/2022''' - 3x3 prototype box assembling ''(Josh, Yeran)'' | ||
+ | |||
+ | '''10/14/2022''' - PMT based 3x3 prototype installation in the hall and alignment (Yeran, Arshak, Sasha, Vlad)'' | ||
+ | |||
+ | '''10/18/2022''' - 3x3 prototype re-alignment (5mm), ''(Yeran, Arshak, Sasha)'' | ||
+ | |||
+ | '''10/19/2022''' - 3x3 prototype re-re-alignment (5+3mm), ''(Arshak, Vlad)'' | ||
+ | |||
+ | '''10/27/2022''' - 3x3 prototype HV base replacement. The HV dividers have been replaced to those with no pre-amplifier and increase HV (from 1000 V to 1100 V) on the 3x3 prototype in order to improve the photodetection efficiency. "(Yeran, Arthur, Arshak)" [https://userweb.jlab.org/~yeran/SciGlass/3x3-HV.pdf], [https://userweb.jlab.org/~yeran/SciGlass/Towers+5mm+3mm.pdf] | ||
+ | |||
+ | '''10/29/2022''' - 3x3 prototype central channel's (#5) HV divider/base replacement "(Yeran, Arshak)" [https://userweb.jlab.org/~yeran/SciGlass/3x3-HV-updated.pdf] | ||
+ | |||
+ | '''11/02/2022''' - Removing PMT based 3x3 prototype from the Hall, for replacing MPT's with the SiPms and make a beam test in the Hall, (Yeran, Arthur, Sasha, Vlad)'' | ||
+ | |||
+ | '''11/05/2022''' - Detaching PMTs from the 2x2cm, 40cm long SciGlass modules and preparations for attachement the SiPms ''(Yeran, Josh, Arthur)' [https://userweb.jlab.org/~yeran/SciGlass/sipm-report.pdf] | ||
+ | |||
+ | '''11/21/2022''' - Attachemnet of SiPMs to the SciGlass and Prototype assembly ''(Yeran, Josh, Arthur)'' | ||
+ | [https://userweb.jlab.org/~yeran/SciGlass/sipm_3x3_proto.pdf] | ||
+ | |||
+ | '''12/14/2022''' - SiPM based 3x3 prototype installation in the hall and alignment (Yeran, Arshak)'' [https://userweb.jlab.org/~yeran/SciGlass/3x3-SiPM-beam.pdf] | ||
+ | |||
+ | '''12/19/2022''' - Removing SiPM based 3x3 prototype from the Hall, (Yeran, Arshak)'' | ||
+ | |||
+ | '''12/21/2022''' - Moving 9 SciGlasses to Genova (INFN) (Yeran, Marco B.)'' [https://userweb.jlab.org/~yeran/SciGlass/CUA-INFN-JLAB_SciGlass-report.pdf] | ||
+ | |||
+ | === Pictures === | ||
+ | |||
+ | = '''5x5 prototype (20x20x400mm)''' = | ||
+ | ---- | ||
+ | === Measurements === | ||
+ | |||
+ | ==== Visual Inspection [https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/Visual_Inspection_1_17_23.pdf] ==== | ||
+ | |||
+ | ==== Dimension [https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/SciGlass_Dimentions.pdf] ==== | ||
+ | |||
+ | ==== Transmission [https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/Transmission-all.pdf] ==== | ||
+ | |||
+ | ==== Light Yield [https://userweb.jlab.org/~yeran/SciGlass/SciGlass_LY/report_LY-new.pdf] ==== | ||
+ | |||
+ | === Prototype construction [https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/sciglass_test_status.pdf] === | ||
+ | |||
+ | === Simulations [https://docs.google.com/presentation/d/1mFvshgF6XfV1_gGE7qNP6NFwUTiENYjtmmua540MKpU/edit#slide=id.p] === | ||
+ | |||
+ | === Cosmic test [https://wiki.jlab.org/cuawiki/index.php/File:Spreafico_Update_23_02_13.pdf] [https://wiki.jlab.org/cuawiki/index.php/File:EIC_23_02_20.pdf]=== | ||
+ | |||
+ | === Beam test === | ||
+ | |||
+ | [https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/5x5_installation.pdf (5x5 prototype installation in HallD)] | ||
+ | |||
+ | === Data analysis === | ||
+ | |||
+ | ---- | ||
+ | ''Useful Links'' | ||
+ | |||
+ | [https://docs.google.com/spreadsheets/d/121DyPS-ypaDI04JNIl_QHkM12LL4LwDHMq40jdKQ4g4/edit#gid=0 (5x5 Glass, RO information PCB_EIC)] | ||
+ | |||
+ | [https://halldweb.jlab.org/rcdb/# (HallD runs, RCDB)] | ||
+ | |||
+ | [https://epicsweb.jlab.org/wedm/screen?edl=/cs/opshome/edm/wall/Status_W_Accel.edl (Accelerator status)] | ||
+ | |||
+ | [https://logbooks.jlab.org/book/hdlog (HallD logbook)] | ||
+ | |||
+ | 5x5 beam test ROOT files: /u/home/yeran/test_12*_sipm.root | ||
+ | |||
+ | [https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/5x5_fadc-2V_run-121163.png (Raw-mode waveforms, run#121163, fADC 2V)] | ||
+ | |||
+ | ===Pictures === | ||
+ | https://wiki.jlab.org/cuawiki/index.php/File:SciglassLY-setup.jpeg | ||
+ | |||
+ | === Documentation === | ||
+ | |||
+ | ---- | ||
+ | 5x5 SciGlass prototype beam test detailed plan/activities/timeline [https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/5x5_Prototype.pdf] | ||
+ | |||
+ | 5x5 SciGlass prototype beam test documentation [https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/beam_test_documentation_5x5.pdf] | ||
+ | |||
+ | 5x5 SciGlass prototype beam test timeline [https://docs.google.com/spreadsheets/d/1CwJVcIRDhr51JtxpQsakKK4meAIScLUfDkQquZgfOyk/edit#gid=496499416] | ||
+ | |||
+ | 1) SiPM 3x3 natural density (ND) filter testing data | ||
+ | 2) 3D model of the 3x3 PCB. It's the .step file. Let me know if you need it in | ||
+ | another file format. | ||
+ | |||
+ | = ''' SiPM 3x3 matrix (Hamamatsu 14160-6050HS) '''= | ||
+ | |||
+ | ---- | ||
+ | ===[https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/sipm_3x3_matrix.pdf (SiPM 3x3 matrix information)]=== | ||
− | == | + | ===[https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/EIC_SiPM_Array_S141606050HS.pdf (Schematics of the 3x3 PCB)]=== |
− | |||
− | === | + | ===[https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/EIC_SiPM-4x4-S14161-6050HS-04.pdf (Test report from the 4x4 testing. 3x3 will be soon)]=== |
− | |||
− | === | + | ===[https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/metal_package_etc_KXX-A12028-ENG.pdf (Hamamatsu's recommendations for SiPM handling)]=== |
− | |||
− | === | + | ===[https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/pcb_3d_views.pdf (3D view of the 3x3 matrix PCB)]=== |
+ | ===[https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/testing_data_summary.pdf (test with PCB - summary)]=== | ||
− | == | + | ===[https://userweb.jlab.org/~yeran/SciGlass/5x5_prototype/S14160-6050HS_Report_Rev2.pdf (EIC SiPM 3x3 matrix - S14161-6050HS)]=== |
− | |||
− | |||
− | |||
− |
Latest revision as of 10:09, 22 May 2023
<-- Back to Beam Tests Main Page
People
- CUA: Tanja Horn (superviser), Yeranuhi Ghandilyan, Joshua Crafts, VSL Team
- INFN: Marco Battaglieri, Marco Spreafico, Mariangela Bondi, Giacomo Ottonello, Stefano Grazzi,
- JLab: Sasha Somov, Vladimir Berdnikov
- AANL: Hamlet Mkrtchyan, Vardan Tadevosyan, Arthur Mkrtchyan
Meetings
NEXT MEETING
Wednesday 01.15.2023 11:00am EST
Update on the 5x5 prototype assembly and checklist for the upcoming beam test at JLAB
zoom info: [1] Meeting ID: 160 317 6325 Passcode: 450782)
Meeting notes []
Wednesday 01.08.2023 11:00am EST
Update on the 5x5 prototype assembly and checklist for the upcoming beam test at JLAB
zoom info: [2] Meeting ID: 160 317 6325 Passcode: 450782)
Meeting notes []
Stefano: (Where we are)
Wednesday 01.02.2023 11:00am EST
Update on the 5x5 prototype assembly and checklist for the upcoming beam test at JLAB
zoom info: [3] Meeting ID: 160 317 6325 Passcode: 450782)
Meeting notes [4]
Update on the 5x5 prototype assembly and checklist for the upcoming beam test at JLAB
zoom info: [5] Meeting ID: 160 406 7208 Passcode: 448495)
Meeting notes [6]
Update on the 5x5 prototype assembly and checklist for the upcoming beam test at JLAB
zoom info: [7] Meeting ID: 160 406 7208 Passcode: 448495)
Meeting notes [8]
NEXT MEETING: THURSDAY FEBRUARY 2 AT 1:00PM ET (postponed on MONDAY, February 6, 11am) )
zoom info: [9] Meeting ID: 160 406 7208 Passcode: 448495)
Meeting notes [10]
Tuesday 24.01.2023 11:00am EST
Update on the 5x5 prototype assembly and checklist for the upcoming beam test at JLAB
zoom info: [11] Meeting ID: 160 406 7208 Passcode: 448495)
Meeting notes [12]
Tuesday, 17.01.2023 11:00 am EDT (14:00 Rome)
Update on the 5x5 prototype assembly and checklist for the upcoming beam test at JLAB
zoom info: [13] Meeting ID: 160 406 7208 Passcode: 448495)
Meeting notes [14]
Thursday 03.11.2022 at 12:30 EST
2x2cm, 40cm long SiGlass 5x5 array Prototype with SiPM for early 2023 Location: JLAB/ CC F226
zoom info: [15]
Thursday 03.11.2022, 9:00AM EDT (14:00 Rome)
2x2cm, 20cm long SiGlass 3x3 array Prototype for SRO tests with cosmics
Location: JLAB/ CC F226
zoom info: [16] Agenda: to touch base and verify the status of the different components (Sergey: hw and deployment in Hall-B, Vardan: ERSAP, Carmelo: Tridas).
3x3 prototype (20x20x400mm)
Hardware
- LEMO connectors (FFS.00.250.NTCE52) [17]
- LEMO bulkhead connectors (PES.00.250.NTME31) [18]
- HV connectors (Pasternack SHV connector PE45556) [19]
- HV divider circuit boards + sockets
- Cables for dividers
- Label Machine [20]
- Black RTV silicone [21]
- Black tape (0.68") [22]
- Filament to print the box for 5x5 (PLA, 1.75mm) [23]
''Readout for '''SiPM based''' 5x5 SciGlass Prototype''
Action items
• Identify one additional fADC (adds 16 channels) for the beam test – Vladimir
• For “standard” (SiPM and NO SRO) readout need from Fernando additional cables (50ft) – Yeran
Available parts:
S13360-6025PS – 36 pc
S13360-6075PS – 20pc
S14160-6050HS – 150pc
S14160-6050HS-04 – 16pc
fADC – 1x (16 channels)
HV/signal cables – 10 channels
FEE: 12 preamps from INFN, 4 Bias PCB (16 channels) from INFN
3x3 SciGlass prototype beam test timeline
SciGlass Task List 2022
Detailed List of Activities
09/16/2022 - Transmittance measurement (Josh, Yeran) Comparison of 9 blocks produced in summer 2022
09/29/2022 - Dimensions measurement (Josh, Yeran) [24]
09/29/2022 - Beam test with 12x1 array in the Hall, (Arshak, Vlad)
10/06/2022 - 12x1 array removing from the hall (Yeran, Arshak)
10/11/2022 - 3x3 prototype cosmic test in clean room, (Yeran, Arshak)
10/13/2022 - 3x3 prototype box assembling (Josh, Yeran)
10/14/2022 - PMT based 3x3 prototype installation in the hall and alignment (Yeran, Arshak, Sasha, Vlad)
10/18/2022 - 3x3 prototype re-alignment (5mm), (Yeran, Arshak, Sasha)
10/19/2022 - 3x3 prototype re-re-alignment (5+3mm), (Arshak, Vlad)
10/27/2022 - 3x3 prototype HV base replacement. The HV dividers have been replaced to those with no pre-amplifier and increase HV (from 1000 V to 1100 V) on the 3x3 prototype in order to improve the photodetection efficiency. "(Yeran, Arthur, Arshak)" [25], [26]
10/29/2022 - 3x3 prototype central channel's (#5) HV divider/base replacement "(Yeran, Arshak)" [27]
11/02/2022 - Removing PMT based 3x3 prototype from the Hall, for replacing MPT's with the SiPms and make a beam test in the Hall, (Yeran, Arthur, Sasha, Vlad)
11/05/2022 - Detaching PMTs from the 2x2cm, 40cm long SciGlass modules and preparations for attachement the SiPms (Yeran, Josh, Arthur)' [28]
11/21/2022 - Attachemnet of SiPMs to the SciGlass and Prototype assembly (Yeran, Josh, Arthur) [29]
12/14/2022 - SiPM based 3x3 prototype installation in the hall and alignment (Yeran, Arshak) [30]
12/19/2022 - Removing SiPM based 3x3 prototype from the Hall, (Yeran, Arshak)
12/21/2022 - Moving 9 SciGlasses to Genova (INFN) (Yeran, Marco B.) [31]
Pictures
5x5 prototype (20x20x400mm)
Measurements
Visual Inspection [32]
Dimension [33]
Transmission [34]
Light Yield [35]
Prototype construction [36]
Simulations [37]
Cosmic test [38] [39]
Beam test
(5x5 prototype installation in HallD)
Data analysis
Useful Links
(5x5 Glass, RO information PCB_EIC)
5x5 beam test ROOT files: /u/home/yeran/test_12*_sipm.root
(Raw-mode waveforms, run#121163, fADC 2V)
Pictures
https://wiki.jlab.org/cuawiki/index.php/File:SciglassLY-setup.jpeg
Documentation
5x5 SciGlass prototype beam test detailed plan/activities/timeline [40]
5x5 SciGlass prototype beam test documentation [41]
5x5 SciGlass prototype beam test timeline [42]
1) SiPM 3x3 natural density (ND) filter testing data 2) 3D model of the 3x3 PCB. It's the .step file. Let me know if you need it in another file format.