Difference between revisions of "General Meeting Agenda 3/14/13"
Jump to navigation
Jump to search
(Created page with "The main topics discussed at this meeting were: # Follow-up on the items from the last meeting (background studies and kinematics - see list below) # Report from Simon Sirca on ...") |
|||
| Line 3: | Line 3: | ||
# Follow-up on the items from the last meeting (background studies and kinematics - see list below) | # Follow-up on the items from the last meeting (background studies and kinematics - see list below) | ||
# Report from Simon Sirca on WACS simulations | # Report from Simon Sirca on WACS simulations | ||
| + | |||
| + | |||
[http://www.vsl.cua.edu/cua_phy/images/6/60/Wacs_writeup1.pdf Simon's report on WACS simulations] | [http://www.vsl.cua.edu/cua_phy/images/6/60/Wacs_writeup1.pdf Simon's report on WACS simulations] | ||
Revision as of 12:27, 14 March 2013
The main topics discussed at this meeting were:
- Follow-up on the items from the last meeting (background studies and kinematics - see list below)
- Report from Simon Sirca on WACS simulations
Simon's report on WACS simulations
Items from last time
- What is the desired optimal distance from target for the detector front face for forward angles. This info is prerequisite for background studies, e.g., beam pipe.
- Figure: background per block as function of angle for 1uA beam current and 10cm target (similar to figure of dose rate as function of angle)
- Background estimates at smallest angle and at 11 GeV (and bigger beam pipe)
- Summary of details on geometry information needed for WACS (e.g. resolution), DVCS (e.g., scattering chamber dimensions, beam pipe dimensions, etc.), and perhaps others(?)
- How much of DVCS projected beam time can be shared with pi0 DES and SIDIS (including both Hall A and C kinematics)