General Meeting Summary 1/14/21

From Cuawiki
Revision as of 19:16, 14 January 2021 by Hornt (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

PARTICIPANTS: A. Brown, A. Camsonne, B. Wojtsekhowski, B. Sawatzky, C. Yero, C. Munoz-Camacho, C. Hyde, P. Medeiros, T. Horn, V. Tadevosyan, H. Mkrtchyan, R. Ent, V. Berdnikov, Camille Zindy, M. Boer, A. Asaturyan, J. Roche, D. Hamilton


FRAME (Carlos M.-C.)

  • Frame shipped on 6 January - expect at JLab in week of January 19th
  • not yet included: one spare PCB distribution board, soft-metal shielding box - working with Buckley Systems/NZ
  • Measuring radiation hardness of (10) Crytur crystals for comparison with SICCAS - should take photograph
  • standard: 30 Gy
  • could go to 1000 Gy and higher - try 1 MRad
  • 3000 Ci Co-60 source (1 MeV photons)
  • 1 week notice for facility


ASSEMBLY SPACE (Brad)

  • Floorspace: boxes from Orsay will go to Test Lab High Bay area, also for assembly, SRF group moving out
  • Setting up there, e.g. cables being moved there
  • NPS fully assembled designed to be moved into the hall


FAST ELECTRONICS GROUP (Brad)

  • LED driver boards - moving forward
  • Chris will update at the collaboration meeting: firmware on VTP, F250, LED driver board etc.
  • HV certification on connectors pending
  • Update on anode current tests at the collaboration meeting - Action: check with Fernando


MECHANICAL DESIGN (Paulo)

  • Cable layout/routing - ongoing
  • isolation NPS from ground
  • Detector rack/carriage waiting for delivery
  • Support for magnet


CRYSTALS - ESR REFLECTOR SHAPING (Vladimir, Carlos Y., Josh)

  • 10 tools were fabricated
  • HCList approved for work with oven
  • Test run with oven completed and 10 pre-shaped forms made
  • ESR(Al composite) ~ 60um, rigid - needs to be preshaped
  • Expect need 3-4 months to make ~1100-1200 pre-shapes
  • At collaboration meeting will have discussion about how to place tape etc. when wrapping crystals


DETECTOR SUPPORT GROUP (Aaron)

  • Fault chart development: crystal zone temperature/humidity - placement of additional sensors
  • Hardware Interlock system development
  • HV cable fabrication
  • Condensation - injection of dry air into frame - discussion still ongoing how to do it, e.g. details about the system
  • Action: Follow up with Jack Segal on dry air flow


SOFTWARE (Steve, Carlos Y.)

  • Working from SHMS calorimeter code - creating larger calorimeter
  • Plan to test with data samples from SHMS full waveform data (mode 10) from recent runs
  • Trigger NPS
  • trigger off HMS, clustering
  • in some kinematics where rates are high option for coincidence with NPS
  • full readout waveform - took some data with SHMS in recent runs


COLLABORATION MEETING AGENDA

  • Add talks:
  • Fast Electronics Group Update (Chris)
  • What needed for WACS for ERR (Bogdan or David?)
  • Under software: add discussion on critical path software, e.g., HCAna software modification


NEXT MEETING: NPS COLLABORATION MEETING 1-2 FEBRUARY 2021

Retrieved from "https://wiki.jlab.org/cuawiki/index.php?title=General_Meeting_Summary_1/14/21&oldid=3465"