General Meeting Summary 4/4/19

From Cuawiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

MAGNET (Charles, Bogdan, Rolf)

  • Assembly and testing (Charles)
  • Good progress with setting up for mapping tests, working on modifications for mounting the traveling stage
  • OSP in progress - expect first draft on 4/8


  • NPS Fringe Fields (Bogdan, Rolf)
  • Discussion of slides
  • Results show that a minor (mm-scale) vertical offset that can be taken into account in HMS optics as is standard practice
  • Further mitigation of the already small vertical offset can be achieved with shielding; in this case no optics correction is needed
  • Horizontal offsets are negligible


PMT AND DIVIDERS (Vladimir, Alex S.)

  • Crytur crystals and modified/bypassed bases have been tested and installed in 3x3 prototype. Plan to install the prototype behind the pair spectrometer in Hall D on 4/8.
  • Reduced gain (4-6 compared to 28) amplifiers are being prepared
  • Anticipate some test time for modified amplifiers also with NPS prototype/ComCal at end of spring run


CRYSTALS (Vladimir, Tanja)

  • Discussion of dimension comparison Crytur vs. SICCAS - both vendors were originally given specs: 20.5 +0.05/-0.05mm
  • SICCAS mean globally higher than specs - would be consistent with 20.6 +0/-0.1mm
  • CRYTUR mean is ~20.45mm, which is consistent with vendor requested and approved modified specs 20.5 +0/-0.1mm
  • Crystal-to-crystal size variation is +/-0.05mm for Crytur and large fraction of SICCAS crystals, in particular the first 460 pieces
  • Variation in size along the crystal for Crytur is 0.025mm
  • REJECTION CRITERION: crystals will be rejected if larger than 20.6mm
  • Optics tests of the 160 replacements SICCAS crystals are ongoing. Many fail light yield requirements.


FRAME (Carlos)

  • Mock-up tests ongoing - identified issues with PCB board sliding and working on solutions
  • Work on cable dimensions ongoing
  • Mechanical calculations for carbon fiber structure supporting crystals ongoing - expect deformation on order 5-6um


SOFTWARE (Ho San)

  • Adapting Hall A clustering/photon detection analysis software to NPS configuration
  • Thinking of ways to expedite NPS analysis compared to Hall A? - e.g. better algorithms, higher speed
  • Online data taking also important - Brad S is working on this


ERR PREPARATIONS

  • Next meeting (4/18) will start with discussion of the speakers' rough content presentation slides - please prepare slide titles, table of contents or equivalent
  • 4/18 meeting will be two hours


TCS UPDATE (Vardan)

  • Presentation of ongoing simulation studies and results


NEXT MEETING: THURSDAY 18 APRIL 9:00-11:00 AM (ET)